Counting matching models…
Hello print friends, as some people have requested, you will find now the “ right hand version ” of my robot hand. The hand is assembled from several parts: When assembled, the hand can still move freely. The hand holds its position…
After using the zip ties for a while to level the Pinda Probe I started to get worried about running out of them so I designed this. This replaces the zip tie that is used to level the probe. It is a very quick print and is well worth…
This 90° Corner Clamp will give you a helping hand when holding 90° corners and "T" joints together securely during assembly. A second is included for “T” joints or to allow access for gluing. Great for things like constructing model…
Dual Direction Thread Screw Set (Left-Hand, Right-Hand & Double-Thread) This model set contains several types of screws and matching nuts designed for testing, mechanical demonstrations, or educational purposes. Included Parts Right-hand…
This is a Nozzle Wiper Arm with Purge Bin for the Prusa CORE One /+ that uses Bambu Lab A1 silicone nozzle wiper pads. It's available for both left- and right-side mounting. This is version 2 , an iteration of the popular version 1 , and…
Until you find a purpose for the hole in the right panel of Core One, this cover will keep dust out and heat in. I recommend printing it in PETG or any filament that can withstand 55°C of a fully heated chamber.
I used Hammer's great controller scan published on Grabcad and did my best to align it to XY axis as best as possible using Quest Pro model as reference. Simplified in Meshmixer and cleaned up in Sketchup to make it solid. Category: Scans…
Intro This is a very compact, low-profile 90 degrees right-angle bit holder for standard hex bits . It is designed to reach screws where a normal screwdriver or bit holder simply does not fit. The special designed variable bit fitting…
Hi, used these two great models, one from Fred Boisselier, https://www.printables.com/model/540699-creality-k1-max-side-load-spool-holder and the other from Hugo Groeneveld, https://www.thingiverse.com/thing:3020026 to create an excellent…
Toilet - THRONE ROOM right side - sign, easy to print
Super Bright LED Light Bar RC Car Roof Lamp CH3 Control for 1/10 RC Crawler Axial Capra SCX10 II 90046 RGT EX86100 TRX6 TRX4 D90
Something I recently learned is that the belt clip is a bit weak, so I just made some changes 5/1/24 and will keep the old files up, but be warned they are not awesome. NEW files use an 8 mm diameter spring to close the lock. If using the…
2023/11/28 Update It was updated with some modifications to better match the shape of the base.
Some time ago I was looking for a nice hinge to finish the encasing of my printer. Thanks to J-Max I found a nice hinge. It was easy to print and a lot stronger than the versions lying down. (https://www.thingiverse.com/thing:1396038) But…
Replica of Fender Stratocaster knob. I made it also for lefthand guitar! update: added the version with numbers go to 11. Now you can have an extra push over the cliff! :D update2: thanks to the feedback I have enlarged a little bit the…
Hinge for the Audio-Technica ATH-M40x. I tried out the version from thingiverse ( https://www.thingiverse.com/thing:2823187 ), but I thought it didn't fit well so I recreated one myself. I think it works well! Made a left and right version.
[update] I added a new version “trayStackerShort” which doesn't extend as deep into the tray. This is useful when freezing liquids so the stackers don't get stuck and it prints faster.[/update] These have been confirmed to fit trays for…
Centauri Carbonのノズルの右側コネクター取り外しジグです。 ペンチで外せますが専用ジグがあると便利なので作りました。 This is a jig designed to remove the right-side nozzle connector of the Centauri Carbon. I designed this dedicated jig to make the process easier and more convenient.
This is a 6" corner brace (for clamping), aka right-angle clamp, aka positioning square. As requested, there are now four variations: A: Sharp corner — measurements on sides (inches & millimeters) right down to zero B: Corner nipped — for…
Simple circular holder - fits most challenge coins. Quick print, no supports. Small footprint.
No supports are required. I suggest a filling of 20% to 50%. Additional hardware required : M8 nut M8 x 80 (or longer) screw/bolt
The original design was a nice start / frame, however, I thought it would be an improvement (and a big savings on filament / print time) to add honeycomb cutouts, a 45° front angle (to match the OEM front panel angle), & added the PRUSA…
A 3mm thick 15mm x 15mm right angle bracket with two 4mm holes and side supports.
I needed a right angle screwdriver handle that could fit in a very tight place and none of the things shared online was small enough so I quickly created one using Blender. I shared the .blend file if you want to remix it so it better…
As the title said, added an angle to the storage box. It does not match the angle of the display unit but the knob is free. Copied from https://www.prusaprinters.org/prints/31977 Print instructions Printed with .30 and PETG. But would…
This is nothing special, just a basic bracket to use in a pinch but is surprisingly strong. I printed mine with 6 walls and 35% infill and have been using 2 of them to hold a wooden shelf with up to 11 rolls of filament at any one time.…
Ender 3 V3 SE Right Bin / Bucket If you repositioned your LCD stand, there is a shorter version. https://www.printables.com/model/592886-ender-3-v3-se-ender-3-se-lcd-reposition-stand Don't forget supports!! Left version can be found here:…
Originally designed by Frank Lloyd Wright for the Ennis house built in Los Angeles, 1924. This house was one of a handful of “textile block” projects created by Wright, a system of interlocking concrete blocks with bold patterns that…
I designed this conversion adapter to mount a 120mm fan I had on hand because I didn't like the appearance of the stock fan included with the AXP90-X47. Required other than printed parts: 4x M3x5x4mm heat-set Inserts 4x M3 screws,…
This outlet replaces the existing standard one in your pool I have a 15x42 Intex pool, and it seems that between the threads or the diameter of the outlet cover, the other designs are slightly off for what I have. This design matches the…
It is designed for the Bambulab plates but I guess it will work for other plates as well… I added the missing "coupler" to couple the front and back. I glued the parts together. and mounted them to the printer with double sided tape. The…
Printed on PLA infill 50 % to be very solid and strong , i think its better if you can print it on PETG How about buy me a coffee buymeacoffee.com/spank7
In search of a suitable 19" rack mount for a Raspberry Pi 5, I couldn't find anything suitable. The model was inspired by LittleProgrammers' "Raspberry Pi 5 Rack mount," which however did not meet all of my requirements. These…
This project had two inspirations. The “Serious Clamp It Square” by J-Max is amazing. https://www.thingiverse.com/thing:1306832 This thing is stiff, which is needed for clamping. It is large and feels strong when you hold it in your…
This insert stores the basic components of the Bomb Busters game, while the advanced components are stored in their cardboard boxes. It is designed so that the box can stand upright without the need for lids. The model features a special…
Have the burning desire to conquer the skies? Then you're not alone. The pioneers of aviation risked their lives to learn how to control their barely flying contraptions. You don't have to risk yours to re-imagine their early feats with…
Creality K2 Plus - bin Right position This chute model is for the Creality K2 Plus printers. The chute is designed so that it does not interfere with the normal operation of the fans that are located on the back of the printer. It is…
In 2011 I lost my left hand index finger in a work related accident... Bio Mechanical prosthesis are available... but very expensive…. So I decided to learn how to 3D print, I watch learning videos on YouTube on how work with AutoCAD…
I really like the original design by Simomura, but found that I couldn't see the top lights of the Google Home Mini when interacting with it. My Home Mini sits by the TV and the angle of the R2D2 pointed the lights away from my viewing…
This model is compatible with the lego system.
This model is compatible with the lego system.
Low profile right angle cap for the Neutrik NC3MXX or NC3MXX-B. The thread screws into the plug about 1 turn, this seems to be working at least with the cable I have. It also holds the pins in place. Perfect for your audio mixer bag,…
Poop Chute: The chute will print on the Kobra S1 build plate diagonally with some rotating. I've added a 3mf file with the print oriented already. Update: I've created a “5cm” version that is deeper than the original (3cm). Sometimes,…
I have created better back cover of the cables going out of the heatbed used for PRUSA BOX. The original one has unsufficient space inside for the cables to be placed comfortably. My upgrade cover is almost of the same size, but the…
This is a replacement part for the Sony WH-1000XM4. So Recently my favorite pair of headphones that i've had for the past 4 years, finally broke, from my research I found the hinge breaking on the Sony WH-1000XM4 Headphones is pretty…
I printed it upright in PLA on my MK3S+ no problems or support
Right Angle Cartographer Mount This mount is designed to be used with the Cartographer 3D Right Angle V3 probe. This is a side mounted design, featuring zero Y offset, reducing the effects of Axis Twist . Help support my work with Ko-Fi…
Google Translator: I once created a poop slide that you can easily print and that should work with 1-2 magnets (8mmx3mm) and the original screws or with 8 magnets (I haven't tested the pure magnet version yet)! The chute cannot be…
Hi, I used a great models from Hugo Groeneveld over at https://www.thingiverse.com/thing:3020026 to create an excellent side mounted spool holder with bearings for the K1 Max. This model replaces the two back screws with (M3*10) for…
Designed after Easy-Bot-3D's AAP-01 Charging handel to make it one sided. It has the option to use a m5 screw to secure it onto the pistol, however in my testing, its a snug fit and should stay on without the screw. This can be used for…
Boomerang for left and right handers … still improving the flight characteristics V1: 2023-03-02: V2 added
Use 1 inch long 1/4-20 bolts and wing nuts for this remix. I got the zinc ones from Lowes. Print Settings: Overture PLA at 215'C hot end / 60'C bed Smart fill supports at the 3 bolt ceilings 0.3mm layer height DRAFT 30% cubic infill
replacement part for a fiat grande punto or punto evo Printing settings: Print in PETG or higher temperature material 4+ perimeters Supports everywhere print laying on its side
Centauri Carbonのノズルの左右一体のコネクター取り外しジグです。 個人的には左右は独立したジグの方が左右一体型よりも使いやすいと感じました。 Elegoo Centauri Carbon Right and Left combined Nozzle connector puller. In my experience, having independent jigs for the left and right connectors offers…
The Mandalorian beskar armor right arm (flamethrower). The model is based upon on-screen pics and it is not very accurate (I haven't been able to get quality pictures of it). UPDATE: Fixed wrong surface on right attachment. UPDATE: Fixed…
Based on the design (https://www.printables.com/de/model/392102-elegoo-neptune-3-webcam-mount) I made a mirrored version and made the contact surfaces a little thinner for a better fit. Fits the Elegoo Neptune 3 and 4 Series (incl. Pro /…
Tool holder for the ryobi link. I printed some with 40% and some with 50% infill // PETG and .08 nozzle// gyroid infill with Rectilinear top and bottom layers. // with supports on the build plate
printable without support
Attention: Please measure the width of the frame (see picture). The width must be approx. 40mm. Apparently there are deviations in the width of some printers either due to changes or quality problems at Creality! If the width is correct…
This model is compatible with the lego system.
I like the original design, but it seams it is designed for left handed. My right hand is reserved for the soldering iron. So, the files are mirrored, to be used with left hand. It sits better in left hand, and scroll cog does not poke…
V2 added which is 10mm winder, larger opening at top exposing the printers exit shoot allowing larger poop to slide through and 3 degree more slope giving it about 14mm downwards angle With version 2 being lower you’ll either have to…
Big thanks and compliments to the original designer! @StoererHauptquartier On my printer the Rotor fused and locked in place. Seems a pretty common issue. This remix opens the clearance by 50%. I printed this on MK4S 0.40 nozzle and 0.10…
I've wanted to create a Rodin Voronoi sculpture for several years, and this is my first! I modified the scan created by Aaron Humphreys on MyMiniFactory , and added Voronoi texturing in MeshMixer. From the Musee Rodin site : Rodin worked…
Remodel of Tick Tock's Harvest right short tray stacker to make it snap on firm in place. The short size is perfect for most uses.
While you are staying safe at home, you might have something break that you'd typically go buy a replacement or perhaps a repair bracket for. (For example, the snack drawer's increased contents and enthusiastic children might result in…
Do you have something to hide and is your roommate afraid of spiders? Then use this knob….. Or just because you like such a knob or spiders. To operate you have to grab the spider by the lower body. Original design. The model I used for…
Wanted to use my digital spool so I cut the holder from Macieksa's model and attached it to ThomaS's model. Nowhere near perfect as I am new to this. I also shortened the PFTE holder location. Just for my preference really. Uses a PC4-M10…
For best performance 40% infill is enough for top portion and 10% for ball. 100% infill is required for base part.
This model is compatible with the lego system.
LHD s13 240sx left and right window switch trim / door handle bezels.
My flatmate wanted me to scan his Croc and turn it into a badge so here it is at approx. 25mm in length. Very High Res so it will scale well, but it is only the left Croc so if you want two you will have to mirror it which will mirror the…
[update] I created a new version ( https://www.printables.com/model/663843-improved-harvestright-drain-hose-plug ) that helps maintain a good drainage angle better. You probably want that one. [/update] Didn't like the hose just resting…
Improvements: Right-handed version Longer versions for better ergonomics 60 mm version fits perfectly on a MK4S print bed 115 mm version has the same grip to stock distance as a Steyr AUG Magnet holes were modified to fit the more common…
I created this since there were not a lot, if any, cheek rests for LEFTYs... so i made my own!! My Stock Lock & Cheek Rest is a 2-Piece design. This allows for two things, (i) you can just use the Stock Lock by itself if you don't need…
0% infill (max 10%) Inner wall extrusion width 0.6 mm. PLA good enough.
A handy guide so you don't drill your holes all wonky. Comes with a neat little notch at the bottom for drilling into corners or cylinders. Inch Sizes: 1/2, 7/16, 3/8, 5/16, 1/4, 3/16, 1/8 Metric Sizes: 10, 9, 8, 7, 6, 5, 4 Please hold…
Side Spool (left or right) filament guide with filament sensor for Ender-3 S1 No support needed - Gcode included is for Ender-3 S1 PLA / 0.2 / 15% infill It made for PC4-M10 PTFE connector EDIT: S1 pro/Led bar version added ("guide_led"…
i put both halves of the coin together, added a middle layer, reduced the depth of the minting and added a stand. Print upright with copperfill, age it with vinegar or ammonia. have fun! ++ UPDATE ++ Added one with no stand for custom…
Left or right filament holder for Bambu Lab X1, X1C and P1P. The back one annoyed me. Better filament change from the front is now possible. I also made a filament dispenser for wide rolls and to fold up:…
Did a pretty simple edit using TinkerCAD extend the bottom of the upward slope. The original bridge had a gradual overhang that required 5 rows of overhang starting on the second layer. I've extended down the initial part of the ramp to…
Broke the right handguard bracket of my 2007 BMW R1200GS Didn't want to pay more shipping than the piece costs, so designed one myself. I've printed it horizontally where the single hole is situated. Printing it slow and warm. This…
Used Shapr3d to modify.
Welcome, all RC enthusiasts! One of the reasons the TT-01 is a great beginner chassis is the absolute lack of suspension adjustability - you can't mess up the setup this way. However, the chassis is rather nervous and tend to oversteer,…
An easy to print adapter that allows the user to hold and operate both Joy-cons with one hand... This time, focusing on right handed players! Demo video:
I made this thigh armor to make part of my Mandalorian cosplay. For detailed instructions on printing and adding the chipped paint look; check out this video from my Youtube channel:
Pixel watch 2 and 3 charger pins are uni-directional thus if you get a right hand side stand, the placement of your pixel watch will be upside down. This model runs the cable around the frame and allows for your watch to face the right…
Public domain Wright R-2600 radial engine model by mark06gt . Originally uploaded to Blend Swap .
This model is compatible with the lego system.
This plug make it easy to build right-angle cables using Neutrik NC3-X connectors. There are two versions of the cap; this way you can have the cable exit toward the left or right based on your application. These work on male and female…
Original mesh by Matheus Rudo: Fallingwater House - Frank Lloyd Wright - Download Free 3D model by Matheus Rudo (@Matheus.Rudo) [6f2f682] (sketchfab.com) Fallingwater by legendary architect Frank Lloyd Wright is commonly regarded as his…
Rotated and rounded edge removed to be printed upright without supports and better layer adhesion in direction of pull.
This custom mount allows you to install the MMU3 (Multi Material Upgrade) on the right side of the Prusa Core ONE, replacing the stock spool holder. It integrates cleanly into the machine without any drilling or frame modification, while…
EDIT: DO NOT SELL PRINTS OF THIS FOR PROFIT, and please don't buy from sellers on ebay/etsy etc. I haven't made a single dollar from this design, but ebay/etsy sellers have made thousands, which is really lame, and has prevented me from…
Added left side with SD slot. For the smaller add-on see: https://www.prusaprinters.org/prints/122767-sidebox-sidekick
Pokemon Scarlet's Slither Wing, now printable! Some warnings: this is my first time trying to fix up a model! When scaled small, the wings tend to slice with holes or badly placed retractions/seams, probably due to the wings being tapered…
Easy fast print Honeycomb HSW Storage Wall Upright Half Paper Towel Roll Holder. Just wanted to easily plop a half paper or shop towel roll on honeycomb storage wall with the other frequently used items by my MK4. I like to cut the rolls…
Simple Right angle clamp
Found the original chute from vfrgaz, https://www.crealitycloud.com/model-detail/creality-k2-pro-poop-chute-slide-box?source=5 right after uploading my first chute and thought this is so much better than mine. I did however want it to…
![Tamiya TT01 Rear Uprights [Toe, Camber adjustable]](https://media.printables.com/media/prints/119961/images/3518193_31bc09b1-6ae1-4a2d-9feb-f5442f1e1619/20220117_115536.jpg)
