K1 Max Right Rear Side Mounted Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
K1 Max spool holder that is side mounted close to the rear.
- Rating
- 5 / 5
- Likes
- 96
- Downloads
- 876
- Makes
- 8
- Views
- 4,328
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi, I used a great models from Hugo Groeneveld over at https://www.thingiverse.com/thing:3020026 to create an excellent side mounted spool holder with bearings for the K1 Max.
This model replaces the two back screws with (M3*10) for mounting. You can mount high by using top and middle screws or at the bottom by using middle and bottom screws.
You will also need 2 x 608 type bearings.
Updated: Added model with K1 Max logo and filament tube guide.
Updated: Added model with more support to filament roller area, also changed K1 and Creality font.
Updated: Added model as above but with factory spool holder mount.
Updated: Added model with built in spool and ptfe holder, doesn't roll as freely keeping the filament tighter preventing tangles. Hole is 4mm for ptfe tube, if you would like a fitting instead, you can drill it out and tap as required.
Please don't forget to leave a like, Thanks!