K1 Max Right Rear Side Mounted Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
K1 Max spool holder that is side mounted close to the rear.
- Ocena
- 5 / 5
- Polubienia
- 96
- Pobrania
- 876
- Wydruki
- 8
- Wyświetlenia
- 4328
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi, I used a great models from Hugo Groeneveld over at https://www.thingiverse.com/thing:3020026 to create an excellent side mounted spool holder with bearings for the K1 Max.
This model replaces the two back screws with (M3*10) for mounting. You can mount high by using top and middle screws or at the bottom by using middle and bottom screws.
You will also need 2 x 608 type bearings.
Updated: Added model with K1 Max logo and filament tube guide.
Updated: Added model with more support to filament roller area, also changed K1 and Creality font.
Updated: Added model as above but with factory spool holder mount.
Updated: Added model with built in spool and ptfe holder, doesn't roll as freely keeping the filament tighter preventing tangles. Hole is 4mm for ptfe tube, if you would like a fitting instead, you can drill it out and tap as required.
Please don't forget to leave a like, Thanks!