Bambu Lab X1 /X1C / P1P Filament Holder for left or right side
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament Holder for left or right side, compatible to Bambu Lab X1 / X1C und P1P. 2 Version for screwing.
- Rating
- 4.667 / 5
- Likes
- 83
- Downloads
- 531
- Makes
- 4
- Views
- 4,221
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Left or right filament holder for Bambu Lab X1, X1C and P1P. The back one annoyed me. Better filament change from the front is now possible.
I also made a filament dispenser for wide rolls and to fold up:
https://www.printables.com/de/model/519625-bambu-lab-x1-x1c-p1p-filament-dispenser
Different versions with M3 meltin nuts (4.1 mm hole) or with normal M3 nuts.
Remove the rear 2 screws for the original place of the holder and the ones next to it for the fairing. The original bamboo filament holder is needed again.
I took M3 melting nuts from Ruthex, M3 x 3.9 x 5.7!
Please print horizontally for more stability!
Filament: Petg
Layerheight: 0.2
Infill: 40%
Walls: 4
Layer Top/Bottom: 5
Linker oder rechter Filament Halter für Bambu Lab X1, X1C und P1P . Mich nervte der hintere. Jetzt besserer Filamentwechsel von vorne möglich.
Verschiedene Versionen mit M3 Schmelz Einsätze (4.1 mm Loch) oder mit normaler M3 Mutter.
Die Hinteren 2 Schrauben für den Original Platz des Halters und die daneben für die Verkleidung entfernen. Der Original Bambu Filamenthalter wird wieder benötigt.
M3 Schmelz Muttern habe ich von Ruthex genommen, M3 x 3.9 x 5.7 !
Bitte liegend drucken, für mehr Stabilität !
Filament: Petg
Layerhöhe: 0.2
Infill: 40%
Wände: 4
Layer Top/Bottom: 5