1 / 15
Bambu Lab X1 /X1C / P1P Filament Holder for left or right side — zdjęcie 1
1 / 15

Bambu Lab X1 /X1C / P1P Filament Holder for left or right side

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Filament Holder for left or right side, compatible to Bambu Lab X1 / X1C und P1P. 2 Version for screwing.

Ocena
4,667 / 5
Polubienia
83
Pobrania
531
Wydruki
4
Wyświetlenia
4221
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Left or right filament holder for Bambu Lab X1, X1C and P1P. The back one annoyed me. Better filament change from the front is now possible.

I also made a filament dispenser for wide rolls and to fold up:

https://www.printables.com/de/model/519625-bambu-lab-x1-x1c-p1p-filament-dispenser

 

Different versions with M3 meltin nuts (4.1 mm hole) or with normal M3 nuts.

Remove the rear 2 screws for the original place of the holder and the ones next to it for the fairing. The original bamboo filament holder is needed again.

I took M3 melting nuts from Ruthex, M3 x 3.9 x 5.7!

Please print horizontally for more stability!

Filament: Petg

Layerheight: 0.2

Infill: 40%

Walls: 4

Layer Top/Bottom: 5

 

Linker oder rechter Filament Halter für Bambu Lab X1, X1C und P1P . Mich nervte der hintere. Jetzt besserer Filamentwechsel von vorne möglich. 

Verschiedene Versionen mit M3 Schmelz Einsätze (4.1 mm Loch) oder mit normaler M3 Mutter.

Die Hinteren 2  Schrauben für den Original Platz des Halters und die  daneben für die Verkleidung entfernen. Der Original Bambu Filamenthalter wird wieder benötigt. 

M3 Schmelz Muttern habe ich von Ruthex genommen, M3 x 3.9 x 5.7  !

Bitte liegend drucken, für mehr Stabilität !

Filament: Petg

Layerhöhe: 0.2

Infill: 40%

Wände: 4

Layer Top/Bottom: 5

Tagi