Liczymy pasujące modele…
News March 20, 2022 added bigger hook March 21, 2022 added USB flash drive holder March 21, 2022 added hooks (12mm and 25mm, screwed with M3 screw) March 21, 2022 added box (screwed with M4x10 screw) March 21, 2022 added 2 wall parts…
Shelf bracket (2 versions) I made these cool looking shelf supports. They are 150x75mm in size. There are openings in the pattern to accommodate fastening (with some angle). Be careful when fastening the countersunk screws! I also made a…
Stand to mount a Thermaltake PR22-D5 reservoir/pump combo to a 140mm fan (or fan mount). The long axis of the reservoir is offset horizontally from the axis of the mount points, this being designed for mounting to the bottom fans of my…
This model is compatible with the lego system.
This tool has a cube at one end for grouting inside corners, and a sphere at the other end for applying caulking/sealant/silicone. Design features Two-in-one tool saves space on your hard disk. Different sizes available. Printing…
0.4 nozzle, 0.2mm layer height, 3 perimeter, 5 top, 5 bottom, 20% infill gyroid and NO brim, no arachne.
It's ideal to desks and other furnitures. It's perfectly stackable and the pieces fit perfectly. It's original size is 8x3.5x4cm but you can resize it as you want. I would appreciate a lot if you could support me giving a like and…
Stacks with the original DIMM Storage Tray by mars9601. I modified the original solidworks model to create these, leave a comment if you'd like me to upload the .SLDPRT. Both a 2280 only and a 2280/22110 combo are included. The models…
A small honeycomb (hexagonal) trellis designed to support household plants. The two spikes at the bottom hold it securely in the soil and prevent plants from tipping. Dimensions: Total height: 261mm Honeycomb height: 200mm Width: 131mm…
To get a full organizer : Print original's parts : 5x Player 6x Chips 1x MadnessChips 1x Shards 1x SpecialChips (I have printed it with top/bottom layers for the lower part of the model) Add remixed parts : 1x Standees 1x SetupSpacer 2x…
holder for a vacuum pump or other things up to 50mm in diameter
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Mám pro vás Nožičky pro Anycubic ACE PRO. Jsou vhodne na vyvyšení ACE. Ja to použím pro lepší chlazeni. Nohy se normalně nacvaknou na riginalni gumvou nohu. Drží pěkně...…
Good morning, Welcome to my profile, full of models and miniatures :-) I have a catcher for the rest of the filament for you, so that it does not roll all over the printer. It works well and is easy and economical to manufacture. Modeled…
plant support designed in the shape of a honeycomb which is modular and stackable Print settings: 2-3walls 20% infill material : PET-G,ASA,PLA(works but the others are better) Support : yes
Simple Honeycomb Mobile Stand Consists of two parts that you can optionally print in different colors. The stand offers two settings – depending on how you insert the parts together, you can adjust the angle of the stand. Charge your…
I lost bag of yeti wrench holder. I design new holder for YETI 26911282 Combination wrench set (14 pcs/set; 8-24mm) Should print with PETG without support
Disclosure: Although the license for the 270 hinge adapter is restricted I have received permission from @Diablo_1609422 to remix it, which is located here K1C Adapters for use with V2 and V3 270 degree hinges . The license is why it…
Simple replacement 90mm fan cover for mini pc barebone cases.
Introducing the Neon Yellow Grip Comb, a hair tool that’s not only functional but also full of flair. This vibrant Yellow comb combines an ergonomic design with a sturdy, fine-toothed structure that suits all hair types. It’s both a…
A simple cable comb for sleeved PCIE 6 pin cables, tested on sleeved wires with a total diameter of 3.1mm.
It uses M4 bolts and length depends of what you mount it to. I've used 18mm ones. I would appreciate any ideas from you on what I can make. Still new to the 3d modeling and trying to improve, so I'm up for a challenge.
This model was inspired by ThoughtFactory over on thingiverse doing this with a feeder by PETKIT. Also refer this for assembly and demo video: https://www.thingiverse.com/thing:6206548/files Goal This whole setup is done with the purpose…
I designed this model to be used to store my glasses using the honeycomb storage system. I printed using the 90 degree rotated honeycomb, because I installed my as this way on my office. But I also added a model with the regular shape to…
Router bit insets that fits the honeycomb wall by RostaP Print with the bottom down and use a brim I printed mine in 0.20 PLA PETG should work just fine
Dispense your sticky notes efficiently! A simple sticky note dispenser for your home, office or student Honeycomb Storage Wall system - everywhere you need a lot of notes…for example when you are preparing for big and importent exam or…
Key Features: Broad Compatibility: Four versions available for brush diameters of 75mm, 80mm, 85mm, and 90mm, fitting a range of brands including IKEA brushes. Integrated Roll Holder: Fits standard toilet paper rolls with a 16mm diameter…
Combination of dome and the large knob for the SpaceMouse Mini v3 so you only have to print one piece and save 4 screws.
I made a big mistake and put my boards up, with half of them not being aligned with the other half… so had to push out a dozen or so inserts out. My thumb complained… so here's one with a little longer lever to go easier on the thumb :).…
This ceiling light clip is originnaly a metal part which often causes short circuits in the car so i made a new one . I used ABS avec printed it vertically. You can stick some aluminium tape in it to reflect the light
Warning!! You may need to change the orientation of your models to print Things needed: screw M4 20mm min. 6pcs-8psc screw M4 16mm min. 2pcs-3pcs nut M4 min. 8pcs-11pcs Optional: 4 wood screws Print settings: Infill 5% Supports: NO…
Tweezer Holder for HSW (Honeycomb Storage Wall) honeycomb Honeycomb storage wall wall Holder tweezer tweezerholder storage tool organizer hexagon
This is remix on hook for tape for direct mount to the wall, no extra elements needed.
Stackable Drying Box 110x110x40mm 110x220x40mm Honeycomb Style Resize to adjust dimension All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you download/enjoyed this…
Tutorial on the Enclosure : Print: 8x the base 28x railings or 24x holder or for budget 12x 2 for each plexi glass(but there will be a gap ) Plexiglass: The width of it should be around 62,8-62,5cm The length should be of 70cm You will…
This model is compatible with the lego system.
A small combine I made for my Dragonwood & Pacific railroad, loosely based on the (albeit narrow gauge) combines used by the United Verde. While it's freelanced, it's probably as realistic as it gets. I read way too many primary documents…
this is a charging station for the infinitive earbuds case that attaches to the honeycomb wall if you dont know what the honeycomb wall is just search 3d printed honeycomb wall on any browser and you will find out.
Print in place honeycomb fidget spinner. After printing, place the fidget bottom down (same side as it printed) then push the center downwards to release the spinner. Tip: add a small drop of sewing machine oil to get an optimal spin.…
Disc air intake cover for a common form factor of cast iron combination belt/disc sanders with a 6-inch disc. My model is an older Ryobi BD4601, but if you have a similar model, and the under-table intake looks the same as the last photo,…
Print in place Simple clip-on to clean the filament before the extruder. The hinge will feel blocked. Once the resistance is broken, it moves perfectly free. Support needed. I know I don't like it too. Countermeasure would be to cut the…
IKEA SKADIS Shelf with Honeycomb Pattern Dimensions of the bottom part of shelf (plus outer brims and hooks..) 20 x 120 mm 30 x 120 mm 30 x 160 mm Sliced with the modifier to expose the infill pattern You can freely change the infill…
Creating perfect Easter cookies is a breeze with this innovative fully 3D printable cookie cutter-stamp combo! At approximately 3 inches (10cm) in length, this all-in-one tool allows you to shape, cut, and effortlessly release dough. The…
Adapter with support base to the Govee or similar shaped Hygrometer and Thermometer. With this hygrometer/thermometer you can monitor the temperature and humidity inside ACE pro remotely via Bluetooth, receive notifications for changes,…
This is the remixed model of the iPhone 14 case with an added honeycomb pattern on the back because the original model doesn't have any honeycomb pattern even with the misleading photo.
Simple modular network cable comb for 4 cables that can be expanded. Can be wall mounted or just a comb. Multiple combs can be connected to expand capacity.
Added inserts for Honeycomb Wall Storage https://www.printables.com/model/152592-honeycomb-storage-wall Supports only for base
Intro Transform your hoodie into a 3D‑printing tribute with this minimalist yet striking honeycomb bead design. Inspired by the iconic honeycomb infill pattern, this STL model lets you seamlessly integrate a geometric, 3D‑printed…
Honeycomb wall compatible holder for airpod pro case with integrated charging cable. Designed with the dimensions for my USBc to lightning cable. Cable slots in upward from the bottom through an oversized hole, then press fits downward…
This model allows you to mount 15 tweezers to your Honeycomb Storage Wall. To mount this to your HSW you will need the hollow inserts.
Features: holds phone FreeCad file included. It should fit any phone, but only horizontaly. if your doesnt fit I can edit the file for you. The photos are low quality and i am working on improving them, please look at the 3d model viewer…
📦 Description: Take your Anycubic Kobra S1 Combo to the next level with this essential enclosure upgrade! This mod allows you to print PLA with the door fully closed without sacrificing cooling quality. By channeling fresh air from…
Combinable colourful easter eggs. The parts twist together in multiple different ways to make colourful patterned eggs. Inspired by Jakub Lattenberg's similar design There are 5 parts, each with a thick and thin variation. Sorry about the…
Held on a playseat challenge thanks to this design: https://www.printables.com/model/302265-playseat-challenge-shifter-holder-shortened-attach The controller board and wires…
Grille 150x150 honeycomb/Maskownica 150x150 plaster miodu otwory montazowe fi 6
to view it in 3D ---- https://my.spline.design/untitled-4Xvquytd0Cl3YziMcCHIBAHG/
It is a Chickenhead knob for the power control on the Boss Katana Gen 3 50 Guitar Amplifier Combo.
Organize your workspace in one seamless print! This honeycomb-inspired desk organizer prints as a single piece—no supports, no assembly, no glue. Inside you’ll find: Pen Holder: Tall hexagonal cup to corral pens, pencils, styluses or…
Universal Clipper Attachment Combs – Compatible with A5 and A6 Blades (Oster 10, 25, 30) Compatibility: Designed for blades measuring between 48 mm and 49.5 mm in width and 2.5 mm to 3.5 mm in thickness Compatible with A5 and A6-style…
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — An ergonomic, robust and elegant comb. The handle is flexible and rounded of for a pleasing usage and big enough for…
Galaxy's Most Wanted Drea Blackwell is a sought after combat medic. Equipped with a pistol and medical gear, she wears light combat armor. This is the 5th model in a series made for miniature agnostic games like Stargrave, Five Parsecs…
Printed with Creality K1. Settings are: 0.2 mm layer height Ironing on No support needed I sliced coin models in two pieces and glue them together for better surface quality. CoinSide5 model can be x1.5 scale of CoinSide1.
Porte lunettes à fixer sur le https://www.printables.com/model/152592-honeycomb-storage-wall de RostaP
English Hand fan, perfect for the summer, ideal for on the go. Stops eliminate the need to push the fan parts too far and align them. Available in the following sizes: 8 blades ; 13cm length More are coming soon! Print settings: Material:…
I printed this in TPU. Probably could use some wall optimizing in the slicer to reduce retractions and eliminate a lot of the stringing with TPU.
Remixed for Combined Double Battery. Removed divider for batteries. Came out a bit loose but tightens up nicely when the case is closed.
Philips Fixables. 3D printed parts for fresh starts. Need a new comb to fit your Philips Hair Clipper? Print yours now. Simply click it on & clip your hair with precision. About Philips Fixables Fixables is a collection of 3D printable…
A set of 3D printed throttle handles for the Honeycomb Bravo Throttle Quadrant. The original Honeycomb handles are relatively small, and this replacement set has a much more realistic scale. Make those Microsoft Flight Simulator, X-Plane…
There are already some very clever insert removal tools designed for the Honeycomb Storage Wall. But there where a couple or problems I had with them. They all have a inverted wedge used to grab behind the insert means they can't grab…
The Foam Comb (Fomb) is a simple printable tool for picking up nearly any dart type no matter their orientation! No need to aim, simply stab the ground with the Fomb to pick up darts and use the bucket fork to offload! The only…
A modern planter shaped by hexagonal patterns. Print Settings: Layer height: 0.16-0.20 mm Infill: 15-20% Size: 6 cm Opening Scale to 150% for a 9 cm Scale to 200% for a 12 cm Want to sell prints? Check our profile for a commercial license.
Background I bought the Ender3 V3 KE this year (2025) and it seems the original FatBurner toolhead cover is not fully compatible with my revision of this printer, so I ended up printing Ronald Rademaker's combined version. It fit and…
The tool works great in silk PLA and PETG-CF so far. It's a quick print, coming in under 3g of filament. I printed both materials at 0.20mm layers and arachne wall gen on. The silk was printed with “strong” 6-wall defaults, and the…
Pictured is the pegboard version also available on my page. Designed to elevate the router from the floor, this mount was printed without a bottom panel to enhance airflow and cooling efficiency. I included models with wire exits on the…
a fun simple and easy print, was a project to improve my CAD skills. !!PRINT TWO OF THE HANDLE STL!! assembly: i used cake squares for the pins, but use anything that fit. i used super glue to attach the pins. just poke them through the…
Remixed the insert to attach the HSW on threaded M5 rods
A compact honeycomb storage box designed for 45mm tri-blade propellers , ideal for tinywhoops like the HappyModel Mobula 7 . Stores 3 stacks of props. The small version stores 9 props while the large stores 27 props. . Honeycomb design…
Bring a fierce reptilian presence to your collection with this 3D printable STL model of a Lizard Warrior. This formidable combatant is perfect for adding a powerful and unique element to your fantasy displays, tabletop gaming, or…
Honeycomb wallet 9 slots Simple & elegant 9 slot (card) wallet. Use shiny filament so it stands out And if you like my work please follow and support. Thank you beforehand!:) If you enjoy my content by me a coffee. Thank you for support…
This foldable guage is designed to quickly be able to measure the most common distances i run into when playing Warhammer 40K with just one tool. 1" - Engagement range 2" - unit coherency 3" - pile-in / consolidate 5" - typical movement…
What is it? This is a coaster, simple as that. I'm a big fan of things that are simple, functional, and look good too. I designed this coaster to be all those things, and all the while being pretty quick and easy to print as well. How it…
Keep your ½ inch drive socket set neatly organized and easily accessible with this improved holder! This V2 version features chamfered bottom edges for enhanced print quality and includes 3MF files for easy multi-color printing, allowing…
Introduction : I wanted a desktop version of the honeycomb storage wall, so introducing: Feet! Yes! Your honeycomb storage wall can now stand by itself, no more holding it in place by hands! (You have to learn it how to walk by yourself…
it is a desk cable otganizer you can put your cables in it -Honeycomb form for good look - Print with 0.2 Layer Hight
Three variants, two with 4x2 on both sides, another with 2x2. The total width of the plates and track spans 7x2, 7x4, or 9x2. Fun to make little tunnels and archs with the blocks over the track. I generally find printing lego/duplo style…
BSPP Swivel Female-Male according to ISO 228-1. Features wrench flats for easy tightening, with each flat marked to indicate thread size (G1/4, G3/8, G1/2, G5/8, G3/4, G7/8, G1, G1 1/8, G1 1/4, G1 1/2, G1 3/4, G2, G2 1/4, G2 1/2, G2 3/4,…
This throttle lever is designed to replicate the look and feel of the Tecnam P-Mentor power lever, perfectly adapted for the Honeycomb Bravo Throttle Quadrant . It provides a more realistic flight control experience , enhancing ergonomics…
Design Concepts This comb features a sleek, symmetrical design with fine teeth, catering to both aesthetics and functionality. Its distinctive hole in the center enhances usability, allowing for convenient storage or attachment while…
If you have a problem with the building, write to me Sorry fo quality Information In the photo you can't see the lens on the lights and mirrors and also in the photo the body connection is different now it is on pins for a precise…
Put in a roll of toilet paper without the cardboard in the center. There are a couple of designs available, the lid snaps firmly into each of de designs. I was inspired by this design:…
A simple LEGO minifigure holder designed for the Honeycomb Wall system. The figure attaches securely to two studs. Perfect for displaying your minifigures on the wall. Print in PLA or PETG without support
Put in a roll of toilet paper without the cardboard in the center. There are a couple of designs available, the lid snaps firmly into each of de designs. I was inspired by this design:…
Storage/Display solution for the Olight Seeker 4 Pro using the holster for a Honey comb storage Wall
