Honeycomb plant trellis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A honeycomb (hexagonal) trellis for supporting small household plants.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 565
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
A small honeycomb (hexagonal) trellis designed to support household plants. The two spikes at the bottom hold it securely in the soil and prevent plants from tipping.
Dimensions:
- Total height: 261mm
- Honeycomb height: 200mm
- Width: 131mm
- Spike length: 59mm
Printing:
I printed this with Rosa3D Pastel PLA, and it works well for indoor use. However, if you plan to use it outdoors, or if you're printing it in a dark color, consider using a material that is more resistant to temperature, such as PETG or ASA.
The infill doesn't matter too much—I used 15% rectilinear in PrusaSlicer.
When rotated 30 degrees to the left, it fits on an Ender 3 print bed. You can also scale it in your slicer to fit your printer’s build plate.
It took about 1 hour and 45 minutes to print (on an Ender 3—not exactly a speed demon) and used 16 grams of filament.