Honeycomb plant trellis
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A honeycomb (hexagonal) trellis for supporting small household plants.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 115
- Makes
- 0
- Views
- 565
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
A small honeycomb (hexagonal) trellis designed to support household plants. The two spikes at the bottom hold it securely in the soil and prevent plants from tipping.
Dimensions:
- Total height: 261mm
- Honeycomb height: 200mm
- Width: 131mm
- Spike length: 59mm
Printing:
I printed this with Rosa3D Pastel PLA, and it works well for indoor use. However, if you plan to use it outdoors, or if you're printing it in a dark color, consider using a material that is more resistant to temperature, such as PETG or ASA.
The infill doesn't matter too much—I used 15% rectilinear in PrusaSlicer.
When rotated 30 degrees to the left, it fits on an Ender 3 print bed. You can also scale it in your slicer to fit your printer’s build plate.
It took about 1 hour and 45 minutes to print (on an Ender 3—not exactly a speed demon) and used 16 grams of filament.