Counting matching models…
A small honeycomb (hexagonal) trellis designed to support household plants. The two spikes at the bottom hold it securely in the soil and prevent plants from tipping. Dimensions: Total height: 261mm Honeycomb height: 200mm Width: 131mm…
Heart Trellis: These heart-shaped trellises are perfect for supporting your climbing houseplants while adding a decorative touch! I designed two versions for Valentine’s Day: one simple trellis with three hearts and a slightly taller…
This modular plant trellis is designed for anyone looking to support climbing plants on balconies, patios, or in gardens. 💡 Key Features: Clamp System in various sizes: Designed to fit various pole or pipe diameters (e.g. awning arms,…
increased trellis width by 50% and doubled the thickness. Also changed the way they connected for easier connections.
Hexagon Trellis / Rankgitter für 6mm Buche / Bambusstäbe. Schnell und ohne support zu Drucken, auf den Fotos wurden 100mm lange Buchenstäbe genutzt, günstig in 300mm Online zu erhalten. Wandbefestigung über 10mm Breites 3M Tape.
Happy DNA Day 2026! This is a trellis/support I designed for house plants, inspired by the DNA double helical motif. The STL included has a 9cm external diameter and should be able to fit on most printers (such as your typical Prusa bed…
Special enclosure for Adafruit Neotrellis giving access to JST connector I should do another special version soon
Added: 45 and 60 degree clip ons. Useful for support where needed. Had a bunch of unused garden stakes and wanted to build some trellises out of them so I made these. You will probably need to scale up or down a bit. I recommend trying to…
I build this case for NeoTrellis M4 with 5pin midi output for a friend of mine to add more buttons to a lightning console. To date it runs a modified example programm from adafruit (midi-keypad). I'm working on a way to configure the…
Modular plant trellis for 6.2mm (0.24 inch) wooden rod I wanted something for my cucumber to climb on and couldn't find anything useful that I could extend as it grows. I made this modular system that can be extended both vertically and…
I couldn't resist printing @Thanh3D ‘s adorable oddish planter. But if you’re a plant lover like me, but struggle at keeping them alive, this trellis has you covered! Designed to complement your Oddish planter, this trellis offers not…
This is a simple 5in diameter and .2in plant trellis. Works great with Hoya plants but will also work with other plants.
This is a simple 7in diameter and .2in plant trellis. Works great with Hoya plants but will also work with other plants.
Use this to support growing plants. Can stack them on top of each other. Three designs are provided. The sturdy design works as base for tomato and pepper plants. Use the thinner one as the top module as the plant grows. The lightweight…
This foldable wooden trellis wall mount is practical solution for enhancing your garden. Designed for easy installation, it can be mounted securely on any wall, providing sturdy support for climbing plants or serving as a unique…
Small pot plant trellis suitable for indoor climbers Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .30 Infill: 15% Filament: Pursament PETG Signal White Category: Outdoor & Garden
This model is designed to straddle a backboard of 10mm design. Material: PLA Forrest green Infill: 10-15% Nozzle: 0.2 Temp: Preset to 210-220 degrees
A small honeycomb (hexagonal) trellis designed to support household plants. The two spikes at the bottom hold it securely in the soil and prevent plants from tipping. Dimensions: Total height: 261mm Honeycomb height: 200mm Width: 131mm…
another remix because the 90 degree version of my set remix didnt work so i just made one that prints already together. sorry i got fixated on remixing this. i promise i'm done now. you could get them in position and then melt the two…
Based on two growing seasons experience with this design, I strongly recommend printing this with TPU or another Flex filament. This script uses the customizer to create joints for a bamboo garden trellis or plant cage Customizer is…
Easy variable trellis. You can scale it up on different needs and print it multiple times.
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You can use these clips in conjunction with a trellis string…
These tomato and cucumber trellis brackets fit onto 25x25mm tomato stakes (I'd recommend anything over 1200mm in length so that there is enough space for your plants to grow). Pictured is the modular version these take between 4-8 6mm…
Circular trellis for climbing plants Dimensions: Approx 250mm x 116mm x 5mm Printed with: Bambu PLA Basic
Round trellis with inserts for climbing potted plants Dimensions: Approx 294mm x 100mm x 5mm
Very Basic trellis for climbing plants Dimensions: approx 213mm x 206mm x 5mm
This is a 3-Part Case for a set of 4 NeoTrellis Boards that I made for a YouTube video Project. You can watch the video at https://youtu.be/Lo17JRFn0kU Category: Electronics
Rise Garden plant supports Print in PETG, 25% infill Gyroid
A very simple plant trellis to support the growth of your climbing green companions! It prints in three parts (all in same plate in the provided 3mf file), to maximize the size of the circles. Dead simple to assemble. The distance between…
SCROG/Trellis Net Grip – Keep Your Net Secure, No Slipping! If you use SCROG or trellis nets in your grow tent, you know the frustration—over time, as your plants grow and get heavier, the net can slip down the tent framing, making it…
Heart Trellis: These heart-shaped trellises are perfect for supporting your climbing houseplants while adding a decorative touch! I designed two versions for Valentine’s Day: one simple trellis with three hearts and a slightly taller…
This is an inspired work from the video of Youtube channel @TinkercadWorld-ho8ht, Tinkercad Challenge! Turning A 2D Image Into A 3D Model! Intricate Incense Burner! New! I tested TRELLIS3D > ASPOSE3D path to compete with his work. The…
I have tested this model with PLA, but feel free to print it in something stronger if you need it! PLA - 25% infill - No Supports - Print with ring on build plate.
Support for plants. Plant Trellis 3 sizes: smallest for 4 leaves, total height 17.6cm larger for 6 leaves, total height 25cm largest for 7 leaves, total height 29cm
Click here to see collection containing more gardening related designs by 3D Printing Bug. Enhance your plants with these stylish and functional 3D printable trellises ! Designed to support climbing plants and vines, these trellises add…
Support for plants. Plant Trellis. Butterfly.
Click here to see collection containing more gardening related designs by 3D Printing Bug. Give your plants a stylish and sturdy support system with the Garden Trellis - Rectangle Series ! Designed to provide both function and aesthetic…
Support for plants. Plant Trellis. Total length 25 cm.
Support for plants. Plant Trellis. Total length 31 cm.
Hook that fits a 10mm board, to wind up wire for e.g. tomatoes. Printed in PETG
Wall mount for trellis. Mounts to wall or fence with #8 or 4mm screw. 13mm dia trellis clips into the mount. Easy to remove. Use 3 or 4 per trellis. Print on side. Use ASA or other outdoor filament.
Set of 10 Trellis for your house plants Easy to Print All Trellis are 2mm thick
An adorable heart loop houseplant trellis for a small pothos or any houseplant!
This is a nice simple plant trellis. Scale to size, if the size you need is too big for you build plate, what I did was; I split it with Prusa slicer (as seen on pic) so it fits on my Ender 3. No supports then just glued together. Easy!
This holder is printed with the bottom on the print plate for maximum stability. Holders, that are printed on the back, easily break at the front of the slots. If you want more or less compartments, different slot or srew diameters or…
A simple s-clip for tomato plants. The model is designed with 1.2mm and 2.4mm walls so you can use a 0.4 or 0.6mm nozzle no infill needed. The pole it can attach to is 10mm 15mm and 20mm Supports yes.
Unsere Tomatenpflanze wächst in einem Topf. Zur Abstützung wurde ein Stab mit einem Durchmesser von 10,8 mm sowie diese Clips verwendet. Der Clip hat auf einer Seite einen Durchmesser von 10,3 mm und sitzt somit fest. Die andere Seite hat…
This trellis holder was designed to place a curved rose trellis on top of a garden fence gate. There are two versions, one to click the trellis into and one to thread the holder onto the trellis. Both versions are available in left and…
Just print and snap onto your wire. Never run out any more of providing emotional and physical support for you lovely green friends Made a few different sizes 15 mm ( 4 minute print ) 20 mm 25 mm 30 mm
This modular plant trellis is designed for anyone looking to support climbing plants on balconies, patios, or in gardens. 💡 Key Features: Clamp System in various sizes: Designed to fit various pole or pipe diameters (e.g. awning arms,…
I created this model originally to use with ¾ EMT Conduit. The model has been transitioned to parametric model (.f3d) 3 pre-configured files have been included ¾ EMT ½ inch hole 5/8 inch hole Main parameters: Trellis rod diameter Trellis…
My wife wanted to hang her indeterminate tomato and cucumber vines from strings instead of a traditional wire or wood trellis. We have our plants near the fence line, so I figured “why not hang strings off our fence?” Our fence posts are…
I was looking for a trellis for my hoya, since it started to send out a vine looking for a place to settle. Being a huge Warhammer Vermintide fan, i used the power of tinkercad to create this trellis. I hope you enjoy! The trellis in the…
A small stackable trellis with a hexagonal pattern for plants. The Base and Stakes should be printed without supports, but the addon does need support. The addon model is installed by sliding it on top of a lower section. The addon has…
8x8 Neotrellis 3D printed case This is a 3D printable recreation of the Adafruit Neotrellis acrylic case. It has some extra room for the Feather M4 i2s audio adapter. Printing Instructions: All parts were printed in standard black PLA…
Overview This modular hydroponic tower trellis system adds strong, adaptable climbing support to round vertical towers. Originally designed for an 8-inch hydroponic pepper tower , the system can easily adapt to other tower sizes or even…
A simple yet effective modular plant trellis, make it as tall as you want.
A minimalist yet decorative indoor trellis designed to support climbing plants like snap peas, beans, or vines. I wanted something functional but also aesthetically pleasing. I think this trellis hits the sweet spot between functionality…
This wall installation in shape of a Celtic knot triquetra will guide and support light plants. It's made of two parts: the mount, which is nailed to the wall, and triquetra, which slides over it and is held in place by magnets. The mount…
A customizable Trellis for all plants that need a little help. It's parametric and can be adjusted via the equations in the included Solidworks file. Some sensible variants are pre-made to download here. You can also leave a comment with…
BOM: Printed with ROSA3D High Speed PLA Army Green This model features a stylish, cylindrical design with a classic Moroccan Trellis (or Ogee) pattern. Unlike the sharp geometric shadows of my previous models, this one casts soft, curved,…
This trellis is a two-part design, although I ended up only using the first panel because it was sufficiently sturdy. If you print the second panel you can choose to glue it, but it should be strong enough once in soil without gluing. I…
Printed in PLA for indoor plants, but could be printed in PETG for outdoor plants. Lots of places to weave vines through. Made this from playing around with the shapes in Tinkercad.
Rounded edge trellis for your plant no to be fractured. Recomended settings: 3 perimeters 0.2mm layer no supports 5% infil no brim I added "mouse ears" to be sure the project will stick to buildplate. Happy planting!
Modular Hexagon Wall Art and Plant Trellis - Upsized with Wall Mounts and Hidden Supports - Made it bigger to take up more space on larger walls and take advantage of a larger bed. Upsized all components. Developed/Designed a small insert…
Simple to assemble and play, challenging to master. In one-player mode, try to hang as many vines as possible without the trellis tipping over. In two-player mode, win by being the last to hang a vine without the trellis tipping over. The…
increased trellis width by 50% and doubled the thickness. Also changed the way they connected for easier connections.
Hexagon Trellis / Rankgitter für 6mm Buche / Bambusstäbe. Schnell und ohne support zu Drucken, auf den Fotos wurden 100mm lange Buchenstäbe genutzt, günstig in 300mm Online zu erhalten. Wandbefestigung über 10mm Breites 3M Tape.
Here are New connectors: Modular plant trellis system for garden beds and raised beds with plug-in connectors and integrated ground anchors. This trellis system was designed for climbing plants and vegetables and can be expanded in width…
Here is the System: Modular connector pack for plant trellis systems. This set contains different push-fit connectors for building, extending and adjusting modular plant trellis systems in garden beds and raised beds. The parts were…
Ruined Castle Tower Planter & Trellis – 3D Printable Model To see the original model and get the SLT files, click here. Bring an ancient, weathered aesthetic to your garden or interior space with this 3D printable ruined castle tower…
This is fun decorative seedling trellis for when your seeds start to sprout. This is the small size, scale up as needed. Seedlings shown in the pictures are Frontenac Grape Vines.
Give your climbing indoor plants the support they need with this sleek, modern honeycomb trellis! Perfect for Monstera, Pothos, Ivy, Hoya, and other climbing houseplants. Unlike traditional wire or wooden supports, this geometric hexagon…
If you ever find yourself in need of a way to wrap a neo-classical column with garden wire so some climbing roses have something to climb up to? This may work for you. Print a dozen and run some garden wire thru it.
Give your climbing plants a royal home! This modular, Gothic-inspired trellis tower is perfect for vines, ivy, pothos, or any creeping houseplant. Unlike boring standard plant supports, this tower acts as a beautiful piece of decor. The…
Happy DNA Day 2026! This is a trellis/support I designed for house plants, inspired by the DNA double helical motif. The STL included has a 9cm external diameter and should be able to fit on most printers (such as your typical Prusa bed…
Special enclosure for Adafruit Neotrellis giving access to JST connector I should do another special version soon
Added: 45 and 60 degree clip ons. Useful for support where needed. Had a bunch of unused garden stakes and wanted to build some trellises out of them so I made these. You will probably need to scale up or down a bit. I recommend trying to…
Update: I just added a modular one to the collection, that prints faster and allows you to take it off of the plant easier: I had a drawer full of chopsticks from takeout food, but since I have my own at home I never used them. Now that…
My seedlings were growing and in need of some support, but I didn't feel like printing for four hours to get a full trellis. Since I always have some disposable chopsticks in some drawer, I made these simple connectors to make them into a…
Use up your leftover disposable chopsticks to give your growing plants the support they need! This model consists of multiple parts that you can combine as you wish: Connector Stick Small: for small diameters, should fit most tips…
A mini plant trellis that pushes into the soil of a pot to support climbing and vining houseplants — pothos, ivy, peas, string plants — keeping them upright and tidy as they grow. Parametric: adjust the height, width and number of rungs;…
I wanted to combine the clean, technical design of the CORE One with wild organic shapes, so I decided to print a trellis that helps the plants take over my printer. I'll admit that my nasturtiums aren't quite big enough for that yet, but…
I use a PVC arch across my vegetable garden and support my vining plants from that archway using a makeshift trellis. The Tee fittings on this have a tendency to snap after a year in the sun, as they are a tress concentrator, especially…
Work great. Add perimeters until part prints solid.
🇬🇧 This functional cap effectively protects the end grain of 47x23mm trellis wood battens from rain and moisture, drastically extending the material's lifespan. Optimized for garden and landscaping structures. Technical Specifications &…
UPDATE: Added an easier print version added in response to a fellow members printing issues. The Easy Print version has a straight 45 deg corner bevel in the handle cutouts as opposed to a radius. Simple stackable storage box in the style…
Wanted a reusable hoop to support garden plants to a trellis that is easy to add or remove. Designed in FreeCAD and printed with PETG. Designed in 4 sizes but can be scaled as needed.
plant stand/ trellis, it has two pointy feet to hold itself up, you can just add the included extension onto the original base and glue on, easy attachment and you can add extensions on one another, great for climbing plants with a nice…
The honeycomb structure provides excellent strength while keeping material usage low. Open cells allow stems, aerial roots, plant clips, or zip ties to be attached easily as the plant grows. Perfect for Monstera, Philodendron, Pothos,…
TPU Plant protector Printed at 0% infill and 2 top/bottom/wall, Vertical and no support. Was worried about my trellis possibly damaging my tomato plants. May be overkill but I figure it doesn't hurt.
After trying a number of commercial moss poles, I wanted something that solved the issues I kept running into: Too small for mature plants Difficult to extend Weak clip-on connectors Poor water distribution Limited support for aerial…
I've modified (with blood and tears) Adafruit's version to fit in the KB2040 controller 🎉 This is basically a combination of the frame and bottom, shortened a lot, to fit the KB2040 controller.
**See new modular version https://www.printables.com/model/512560-modular-plant-trellis-coupler Initial version 130w x 199h mm plant trellis, can link 3 or 4 together. Coupler allows them to stack
