1 / 1
Printer Friendly Aerogarden Bounty Trellis
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Optimized for better printability
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 155
- Makes
- 0
- Views
- 766
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Trellis for Aerogarden Bounty models. Can be stacked.
Print A and B plus 4x connectors per level.
I used PETG with 2 wall loops and 25% infill and it was plenty strong. Adjust as desired.
The f3d file for the connector is parametric and the height of the trellis can be adjusted by altering the “effective_length” parameter to the desired value.
Leave a comment if you want a specific height and are unable to adjust yourself. I'll post an stl for you.