Counting matching models…
This 3D-printed reusable seed pod is specifically designed for the Aerogarden Harvest Elite Slim . It allows you to save money and reduce waste by using your own seeds and sponges, eliminating the need for costly pre-packaged seed pod…
I was not satisfied with other seed pod designs for Aerogarden, so I designed my own. The spiral structure is designed to be sturdy for printing without any supports - very low risk of spaghetti as it prints. It fits these seed starter…
AeroGarden spacers to cover unused holes and prevent algae from growing. Printing Resolution: 0.3 Supports: no Infill: 20% Filament: PETG Black
Simple cover to close the empty holes in my AeroGarden Harvest aeroponics system. This stops light from ruining the roots (use opaque filament) and reduces algae growth. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No…
Extender tube to add 5" of height to your Aerogarden Harvest. The wire going to the LED lamp has enough slack in it to accept this, but it's tight so you may want to extend the wire as well. I've included the Fusion360 file so you can…
A remix of the Aeropod model by @gglockner which incorporates a shroud inspired by @755123BE 's model. (Feb 2025 Update) I added a model for an optional algae cover. Print it out of TPU and sleeve it over the pod, then place the…
Stackable trellis for AeroGarden Bounty to add support for taller plants. The trellis is compatible with the trellis system that comes with the AeroGarden Bounty. The trellis frame needs to be printed in two parts, which can be clicked in…
Water fill cover for the Aerogarden Harvest
A cap designed to cover Aerogarden empty pod holes. It should prevent algae growth in the tank. 15-20% Cubic infill works well at 0.2mm later height. I will add print pics soon
I built this model so that it requires no supports, and can be easily printed without any supervision. Just print the two halves (they're symmetrical so doesn't matter if you print one or both at the same time), drop them into the…
Here are several items I designed for using the AeroGarden/LetPot hydroponic planting system. 1) A blank cap to use when not filling a hole with a plant. I use TPU for this, but you probably could print this with PLA or any other rigid…
What is an AeroGarden? If you don't know what this, you can check it out here: https://aerogarden.com/home/. It's basically a small indoor home hydroponic garden where you use seed pods and is extremely low maintenance. You add water…
This is a simple print to plug unused slots in a countertop AeroGarden , which will give larger plants more room to grow and help prevent algae growth in the water tank. Print Instructions Be sure to print upside down (STL already…
If you have a mix of seeds and seedlings in your starting tray, you're bound to start using nutrients… and nutrients means algae. These covers will protect your empty slots and cores from excess light. NOTE : The cover without the slot…
This is a simple model I put together for holding 15 Aerogarden pods on the smallest IKEA Trofast storage box. It fits the Trofast storage box found here: https://www.ikea.com/us/en/p/trofast-storage-box-white-70091412/ No supports and 5%…
I made this Aerogarden “plug” to use if you don't have plants for all of the holes in your Aerogarden, but want to keep plants in other slots. In my case, I had a plant die and didn't have anything fill the hole with. I printed this in…
Plant spacer for Aerogarden. Made tabs on the bottom reduce filament but included the 3fd file if you want to make them solid. The wording can be changed in fusion, click on the lettering sketch and select the text from the bottom of the…
This model has been optimized to print with: .6 nozzle .84 extrusion width .3 layers (.2 first layer) Low infill (10-15%)
Trellis for Aerogarden Bounty models. Can be stacked. Print A and B plus 4x connectors per level. I used PETG with 2 wall loops and 25% infill and it was plenty strong. Adjust as desired. The f3d file for the connector is parametric and…
This is a snap-on cover for AeroGarden Seed Pod→Shrouded . It helps keep the light off the root medium to reduce mold growth. It has a hole for the plant's main stem and a slot to remove it when the plant has grown big enough. It will…
This lid replaces the watering cap on the Aerogarden Harvest basic so you can add another pod or two for plants. The 2nd hole can be capped to still allow for easy watering. Since the lid is so narrow to fit, it's worth noting the pod…
A subtle mod of the most excellent AeroGarden Seed Pod design by @gglockner_125788.
Simple Diffuser Shade for Aerogardens! update 27dec: i just made a 360 version! update 19dec: i just made a Bounty version! it is upside down by default. please turn it around so the lip is onto the deck of your printer. WARNING i made a…
Simple cap. Printed with Overture PLA. Print at current size for a perfect fit.
This model is only compatible with the Harvest Elite, Harvest Elite Slim, Harvest Elite 360, and potential future products from AeroGarden. It is not compatible with other existing products. Disclaimer This project requires modifying your…
A more tight fitting grow basket for Aerogardens. The grow pods provided by Aerogarden fit loosely and move around a lot, especially when cleaning. Unlike the Aerogarden provided baskets these are not unidirectional. There is a gap where…
I added a graded hole into the lid of the regular size mason jar cap to fit a 1" Aerogarden pod for plants. It could also be used without the pod as a vase holder for a small bouquet, or however else your heart desires... They also fit…
I am excited to get my first harvest of mint and thai basil from this Aerogarden Harvest I got as an early christmas gift…. The only issue is the thing is so bright it lights up my entire house! It is probably brighter than all the lights…
Created this for my AEROGARDEN Harvest as I wanted to use standard rockwool plugs. Consistent diameter with the bottom rounded so it doesn't catch on the water spout. I print these upside down with small support in the middle so that the…
Simple ring designed to replace the lid of a standard mason jar to hold an Aerogarden seed pod.
Plain ordinary plug. Fits aerogarden.
This is a cap to cover an unused hole in an Aerogarden. Also in the download is a pdf to print that has the circular covers for the pad. These are intended to be used when you plant your own seed and want to label the pod. Print Settings…
So growing tomates in a harvest 360 is a bit of a chore. i waited too long to put this in but it is in now. this works great even for heavy loads. it is wide open enough that you can fill the water easily. There are holes at the back so…
This is a simple 30mm adapter plate fitting generic hydroponic cones to Ball brand jars. If you want to use round top hydroponics cones, like this one, on a Ball mason jar:…
Simple pour spout for 3 oz. Aerogarden bottle. I kept spilling some when trying to pour straight from the bottle in to the cap.
The Aerogardens I have call for 8mL of plant food every so often. I was using a syringe originally but wanted more of a scoop/spoon to pour the plant food into. It comes out to approximately 8mL when filled to the line inside the spoon. I…
Two different water reservoir covers for older Aerogarden units.
This simple cover design features a groove on the bottom of the cover to keep it in place and not slide off the unused hole/opening. Don't have a 3D Printer? You can purchase covers HERE Each cover uses only ~3g of filament Covering…
All credit goes to @755123BE for the original design. Just like the original, these covers are designed to be used with “ AeroGarden Seed Pod->Shrouded ”. The original works great and are still my go to when starting out, but as my plants…
I just got a Lettuce Grow Farmstand, which has a funky netcup size, but want to be able to start seeds in my Aerogarden devices and use Aerogarden sponges. One or two other designs exist out there but I didn't love them aesthetically.…
Collar label for aerogarden pods that lays flat on the grow top cover.
A very small Aerogarden with a removable water bowl and grow deck. STEP and f3d files are included if you wanted to modify it Can be printed with both Resin and Plastic. See print settings and post printing for instructions. Print…
simple bin to hold the “Greenjoy” seed starting deck. if your printer mess up and created some gaps, you can simply rub and melt some wax on the inside part of those problematic area. sponge holder tray from darkcody :…
Storage base for Aerogarden Harvest models. There are separate files for each the 1 drawer or 2 drawer and optional flat-bottom drawer or gridfinity drawer, print whichever you would like. The 1 drawer base uses a bottom drawer only. This…
Real simple model to cover empty pod holes when not in use.
Replacement water fill covers for an Aerogarden Farm, inspired by https://www.thingiverse.com/thing:3046603
Remix of simple hole cover that should be compatible with any AeroGarden product. Additional layers on the top of the cover (base of the print) completely block out the light, reducing the possibility of algae growth in the water…
This little converter lid lets you take a 1" Aerogarden- or uHarvest-sized hydroponics pod and use it in a system like the iHarvest that uses 2" net cups. This might be handy if you're out of net cups or if you want to start seedlings in…
Provides support for plants growing from Aerogarden pods. I made these to help my strawberry plants stay more upright since the roots in gravel medium didn't have a lot of support.
Rack for seed pots & plant food for any of the AeroGarden’s.
This is a 'spacer' for the AeroGarden. It's designed as a cover for unused slots while growing larger plants.
I printed it on a smooth plate …
Permet de fabriquer soi même les éponges pour les aerogarden. Taille : 4.5cm de long sur 2cm de diamètre au plus grand. Perso, je mets de la tourbe mais après libre à vous de mettre ce que vous souhaitez. V2: Amélioration: j'ai agrandi la…
I used the baskets from this kit for reference: https://www.amazon.com/gp/product/B0B6BHQ13P/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 The section just under the flange was 31mm so any similarly sized basket should work. Includes a…
A stackable magnetic support collar for small seedlings in the AeroGarden. (I just wanted a magnetic version) The collar comes apart in halves and is easy to install and remove. It also has side vents for airflow and to put stems through…
5cm tall support with circular openings to save material.
a little different than most jar lid pod adapters, the opening on the side allows relocating an existing pod without squeezing the roots back down through the hole. it is off-center, but that minimizes the gap between the pod and the side…
Simple covers for aerogarden hydroponic system.
I needed a place to store all of the stuff one gets with the 50 pod grow anything seed pod kit for the AeroGarden. This has 4 drawers; one for the bottles of liquid fertilizer. one for the grow baskets, one for the grow sponges, and one…
Super fast model to cover sprouting seed pods. Version 1 fits both AG original seed holders (albeit loosely) and others, and version 2 fits the originals but not my other versions …
🌱 AeroGarden Seed Starting Lid – 19-Pod Hydroponic Bucket Topper for Lowe’s 2 Gallon Bucket Kickstart your next grow—before your current one finishes. This custom 3D-printed lid turns a standard Lowe’s 2-gallon bucket into a high-capacity…
Added a little decoration to the original design to plug holes in my aerogarden Harvest model. Printed in white PLA, mine are a little see through. Might recommend a darker color for optimal light blocking in the Aerogarden. You can do…
This is remixed from another member, the originals worked great but my plants would eventually break them, so I cut them in half. I was still getting some algae around the edges of my pods, so I made these slightly larger
Sometimes plants get a little too heavy to grow upright on small stems, this trellis will hold up plants and their fruits with little effort.
After a few years of using the AeroGarden Farm 12XL, I realized that I go through a decent amount of plant food. The official AeroGarden 3oz bottles are perfect for my feeding syringes, but they are not the best value for food. You can…
Brackets are lifted directly from https://www.prusaprinters.org/prints/12565-shelf-bracket-150-mm-lighter-version This could use some optimization as I know more can be removed. Make sure you have the light set to the height you want…
Needed an adaptor to use aerogarden pods I had left over. So I meshed a couple pieces to get what I needed. Thanks to all the help from the previous designs.
I made these seed pod covers for the generic pods used in countertop hydroponic gardens. There's a full pod cover, and one with a slot in case you already have some leaves that won't fit through the hole. The design is based on a pod OD…
Adaptapod Iris but Flexible! just print in TPU. :-)
a simple sprinkler elbow thingy to completely change the flow of water of your hydroponic system. the original way the pump work is just making the water circulate underwater from the side… very inneficent and wasteful. this adapter fits…
Choose your own pattern and density for the filter! YOU HAVE TO SET TOP AND BOTTOM SHELL LAYERS TO ZERO!!! After shell layers are set to zero , choose an infill pattern and percentage for the filter mesh you want. I went with 15% gyroid.…
Replacement tray to use your AeroGarden 3 hydroponic system with seed starter plugs. Instructions This part replaces the top of the bowl in a AeroGarden 3 hydroponic kit. I've made two versions of the tray. One holds up to 16 Grodan 1.5"…
Replaces existing upper riser with 300MM replacement allowing extra space for taller plants. No modification of internal wiring needed, remove factory riser and replace with new riser, uses factory riser lock.
Storage that attaches to the back of the AeroGarden with an M3 screw and lock nut.
I printed this at 0.3mm layer height. Set no top/bottom layers to save some filament, and for aesthetic purposes. There is a divot in the bottom for a connector/alignment brace, but I never got around to making the actual brace. You will…
This adapter allows you to use Aerogarden Pods in your Vegehome Jardin & Jardin Pro hydroponic units. I would suggest using a food safe nozzle and material as these may come into contact with hydroponic nutrients. I printed this in white…
This is part of a series of Kratky hydroponic pots and lids along with Aerogarden prints. This is for an Aerogarden Sprout Seed Starter. The starter allows light to shine on the sponges promoting algae growth. This design covers the holes…
This is part of a series of Kratky hydroponic pots and lids. The wall size is specifically designed for a .8mm nozzle with .8mm wide extrusion for fast printing. It was printed hot in PETG. The basic outer shell is intended to use a 2…
The LED hood that came on my aerogarden has failed 3 times and I was tired of replacing components on the circuit board to make it last another year. I looked at buying a new one from aerogarden but they are crazy expensive. So I designed…
This makes it possible to use aerogardan pods and net cups in the rise garden. I have been using aerogarden sponges in my rise system for years but they do not fit in the rise net cups well, I start my seedlings in my aerogarden, this…
This is a simple model designed for mounting a bottle of AeroGarden liquid plant food to the metal frame of an AeroGarden Farm 12, 12XL, or 24. It uses a large number of 6x3 mm cylinder magnets, since I have a ton lying around. I also…
Ditch those crappy single-use sponge pods! This fully parametric design replaces the standard plastic cone and sponge combo with a reusable canister that unscrews for easy cleaning and seed starting! Fill it with 3.5+ mm ceramic/clay…
I found one of these cheap at a thrift store and it didn't have the basin. I decided to try my hand at designing a replacement. It isn't perfect but it works pretty well. For the basin, make sure you have enough wall thickness and your…
Connector to link Aerogarden reservoir to main hydroponic tank. These are generally intended for resin printed and, except for the plug, would require supports for FDM.
J'ai fait un remix pour pouvoir utiliser mes vieux bocaux de verre acheté en magasin, afin de pouvoir partir des semis.
Found something similar on Amazon, but it lets in light and allows mold and algae to grow. So I made one based off my simple cap design. This comes out to be about half the price, doesn't let in any light, and is universal (can fit…
This plug fills in the hole on the Hydroponics plate.
This is an improvement to my previous cap, I redesigned the hinge as well as added a clip to hold the cap closed and better keep the light out. I printed this in PETG. It'll definitely work in ABS too. I'm not sure about PLA, because some…
A simple cap to cover up unused ports. Keeps alge from sucking up all your precious nutrients.
Printable in regular PLA with no supports needed.
[Glare Screen] useful for Welding, Fish Tanks, Aerogarden, Hydroponics, Photography Flash… you can create a simple lightweight universal glare screen blocking 99% of light from a particular strong source. for example me: i have two…
I designed these in TinkerCad. Print with PLA; no support or special settings required. I did a filament color change to make the designs pop.
These are some 3d printed stands that are designed to adapt AeroGarden Harvest gardens to Style Selections Steel Utility shelving units . This allows to garden to sit level on the wire shelving unit and be resistant to being bumped off…
I made this 3D model so I can use my Aerogarden pods in a “modified” Click and Grow to make it hydroponic. The tab mimics the original Click and Grow design, and you can attach a label to it to identify the plant! No support needed!
Aerogarden cap with louvres to allow water vapor to rise for plants that prefer higher humidity. The purpose of having louvres instead of an empty hole is stop algae growth on parts of the grow deck that are hard to clean. Some algae may…
See my remix, here https://www.thingiverse.com/thing:3709103 . It has a better hinge and a clip to keep it closed! Simple Aerogarden cap with a print in place hinge and stem hole. Quick to print! Print Settings Printer Brand: Prusa…
made this just to quickly block empty holes in my aerogarden. you want to do this so that the water doesn't grow extra algae and gross stuff. works great. it's tapered so it finds it's own center. just throw it vaguely in the direction of…
When starting seeds or in cycles when I am using my AeroGarden as a light box I wanted easy drip trays that fit into the base allowing me to water the plants without worry about leakage or damaging the AeroGarden.
