Aerogarden basin and lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a basin and lid for the MiracleGro Aerogarden model 100643-GRY
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 205
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
I found one of these cheap at a thrift store and it didn't have the basin. I decided to try my hand at designing a replacement. It isn't perfect but it works pretty well. For the basin, make sure you have enough wall thickness and your printer is working properly. This thing is going to hold a decent amount of water and needs to be watertight so test it out first. You can see the white silicone I had to put around the letters where there were some pinholes. I just covered the whole thing to be sure. The larger one doesn't have the letters for this reason.
The holes are 50mm so most 2" net cups will fit. I used the cups for these gelatin treats that are the perfect size. I just poke a few holes in them to let the water in and the roots out.
I chose to make the feet as separate parts so it is easier to print without supports. I found that the center base is the only one necessary to keep it from moving around. Attach them with a little CA glue.
I made a few different heights to choose from. Choose what is best for you.
There are several models of these out there so I can only confirm it fits the one in the picture. It is from 2017 and the model is 100643-GRY. Feel free to modify these to suit your needs.