Vegetable Garden Trellis Brackets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two different brackets to create a 45 degree trellis out of cheap 2x2 wood.
- Rating
- 5 / 5
- Likes
- 108
- Downloads
- 152
- Makes
- 1
- Views
- 1,904
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Two different brackets to create a 45 degree trellis out of cheap 2x2 wood. Designed for 39mm material to give a bit of wiggle room. The A bracket creates the 45 degree peak, and the T bracket is reversible allowing it to be the top (up arrow hole) and bottom (down arrow hole). Holes are planned for drywall screws but use what you like. You can fit one A and two T brackets on a 250mm build plate to print one side of a trellis at a time.
Inspired by the amazingly high pricing of metal brackets at the hardware store. Will burn about 100m of 1.75 filament per trellis at 15% gyroid infill. Will let you do the math to determine if printing is cheaper than buying. Finished product does look nice in PETG. Would have been even better to do in recycled PETG.