Counting matching models…
Summary: This is a model of a mountain climber climbing a mountain. The model is print-in-place with no assembly. Print Settings: Layer height: .20mm Supports: Organic supports are needed only on the build plate Skirt, Brim, Raft: No…
Print approx. €3.05–€3.73 excl. taxPreliminary estimate for one variant
My wife bought ceramic ornaments like these for our daughters to paint. Unfortunately, they didn't grip the rim of the pot very well and were very fragile. I decided to see if I could make something better. Be gentle, this is my first…
My son wanted to sell his Beyblade stuff, and one leg of this arena was missing, and I thought lets waste time to remodel that thing. Lucky me one of the legs remained and I could use it as a measure model. It fits perfectly and was fun…
Remix to use without a bolt. Just tie a not in a rope and put it through the ball. I cut out an extra cylinder so the knot would not stick out, but disappear into the ball. Printed with fuzzy skin and gyroid infill in Cura. Used support…
Climbing holds/rocks made to fit kids hands, size is bigger and holes to secure them to the wall are made for one size bolds. I am using Prusa MK4S with ABS+ or PETG, walls are thicker and surface is using specific Fuzzy skin setup.…
I wanted my Lucky 13 to climb my Lack enclosure! This is just a new waist with a loop for 1.75mm filament!
This is strong enough on my printer for my weight in PLA, but I do not guarantee anything, use with caution and print strong. There are three depths for fingers: 25mm, 15mm and 10mm. The depths are marked for reference. Print 2
Edit: FreeCAD updates broke the way the spradsheets work. There is no way to get this file to work without me hassling through it again, which I won't. If you are a Freecad person, try to find an older version of freecad for this to work.…
I've got a patio and my best-friend-besides-my-spouse likes to plant things in it and, because I've got a 3D printer, this has led me to use my printer to make fun things. In this case, a trellis for plants. My goal for my patio garden is…
My take on an easy-to-carry fingerboard featuring 3 edges and a hole. Use a strap in a loop and hang the TriBoard from a tree or a pull-up pole. The 3 different sides work great for different training sessions. The edges are 10, 15, and…
A parametric 64 mm modular moss cage for climbing houseplants. Large fleur-de-lis openings expose damp sphagnum to aerial roots, while reinforced rings and eight buttresses provide structure. INCLUDED SOURCE PARTS The OpenSCAD file can…
This is a recreated 3D model of an available bronze sculpture you can buy online. Requires quite a few supports due to the odd geometry. He's got holes in his hands so you can easily thread the “rope” into his hands. Hope you enjoy.
Hang board for use for portable training or your own home gym. I used 1100 paracord for the loop but you can use 550 cord as well. Feel free to adjust the size to suit you. I would recommend putting some kind of fuzzy skin on there to add…
Heart Trellis: These heart-shaped trellises are perfect for supporting your climbing houseplants while adding a decorative touch! I designed two versions for Valentine’s Day: one simple trellis with three hearts and a slightly taller…
This modular plant trellis is designed for anyone looking to support climbing plants on balconies, patios, or in gardens. 💡 Key Features: Clamp System in various sizes: Designed to fit various pole or pipe diameters (e.g. awning arms,…
I made this keychain board for my car keys, keys, etc. I made my nuts out of 2mm metal wire and some cramp connections. Over that some colored shrinking tubes and then a clear protective color. The nuts are made on an SLA printer and the…
Device to prevent climbing carabiners from crossloading during unattended use, similar to the avant climbing flex link. Must be printed in TPU https://hownot2.com/products/flex-link legal disclaimer: Climbing is an inherently dangerous…
Made yet another upgrade version from V2, here is V3 Made Slic3r pre-set with fussy skin to add grip texture. removed a bit of material so it would print more efficent. Tested lower infill and parameters. I weight about 105 kg and Slic3r…
A stair climbing attachment for the Workzone type 27839 foldable hand truck from Aldi / Hofer. It allows you to slide heavy goods up and down the stairs relatively easily, without “crashing” the hand truck on each step. The climbing…
a modified chassis for crash derby cars easy to print no supports fits prusas models
These 3D printed hangboards deliver versatile training surfaces for climbers of all levels. Each design features multiple grip configurations including deep pockets, slopers, and jug-style holds for comprehensive finger and grip strength…
Thought I'd do something a little different. I love old 1920s and 30s cartoons so this came to mind. Perfect for going up and down. Built around RobotHut's string climbing mechanism, it works perfectly. I used 20# or 30# (forgot which)…
A pot/planter for any vine plant like tomato. Modular, easy to adjust. The first version has every part but the biggest part is made for my 300x300 plate. There is a second file adjusted for 250x250 plates Vine parts can be weak, with 2…
Printed on a Bambu P1S in PLA+ , no supports needed. I'd recommend printing with a fuzzy skin modifier (see Pocket_Fingerboard_v1_fuzzy file) for higher friction or sanding with low grit.
In preparation for International Women’s Day 2026 , a friend who runs a local bouldering gym organised as an association asked me to create a special climbing hold for the event. This model is a fully usable climbing hold , remixed from…
Remix of Clippy V2.0 to use with cheap telescopic carbon rod (aliexpress, fishing gear) Glue in a M8 threaded rod (with 2-part epoxy) Thanks for the great original model!
Align the side groves with the main "length" of the support
I created this adapter to solve the problem which could leads to expensive rear dropouts damage of your carbon bike frame. When you are using Wahoo Kickr Climb with your Kickr trainer and original metal rear thru axle adapter supplied…
I used 6mm X 3mm round magnet. The hole is 6,2mm of diameter for a snug fit, you just have to press down the magnet flat on a table. If you use the STL files, for a textured hold use the fussy skin option; the g-code files have already…
This is a minimalist and rugged G-Hook designed specifically for creating bracelets out of retired climbing ropes or thick paracord. If you are a climber or hiker with an old rope that can no longer be used for safety, this is a perfect…
This build is part of XBS (Experiential Build System), a modular catalog of parts designed for the XRP. XBS allows users to easily add mechanical functionality to the platform for competitions, automation, and fun. The Climber is designed…
Cairn is an immersive survival climbing game where you play as Aava, an experienced climber, attempting to conquer the unconquered summit of Kami (check out Cairn: https://www.thegamebakers.com/cairn/ ). Climbot is your robotic climbing…
Dutch just finished watching some old Tarzan reruns and decided to go climb some trees in the jungle, maybe swing on some vines, or even play with a friend who's been looking for him lately. Dutch from Predator has finished his battle…
Printed in TPU 95a. Should work for most sizes of climbing carabiners. Designed to be a snug fit. Can be upsized or downsized to fit different sizes.
This is a remix of the original model linked below. I've extended the base a bit to have enough space to hammer a nail through it, so I can attach these hooks on wooden fences more easily. Print sideways as oriented. Try using a colour…
Climbing modular plant support for small plants. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 0.3 Infill: 30 Category: Parts
Made upgrade version from V1 to add a jug type hold on the top of the old
This is a Rock Climbing Grip Trainer designed for training finger grip strength, can be used on a rope or mounted. I suggest printing with 10 or so perimeters and 10 top and bottom layers to ensure strength.
I remixed the original origami remix of the model and made it into a double carabiner to hold rockclimbing shoes. I was also editted with etchings because I wanted to give it as a wedding gift to some friends of mine who rockclimb. The…
For the most comfortable user experience, I recommend sanding the hanging edges until a desirable smoothness/texture is reached. I use a section of nylon rope I bought from a hardware store to attach the edge to a secure mounting surface…
This is a digital 3D printable model of Climbing Red Panda Toy . 🌿🐼 You will need two pieces of string and a place to hang it, that’s it. After that, continuously pull one string at a time and observe how a hungry red panda climbs for his…
Reddit post with video: https://www.reddit.com/r/Hydroponics/comments/1fe9l4d/3d_printed_ladderpot_for_morning_glory_and_other/ Print settings I've used A1 Mini with: 0.6mm nozzle (so it's faster) 0.24 - 0.3mm layer height 5-7 walls - as…
Version2 is for an M8 threaded rod Version3 is for any 8mm diameter (wooden) rod! Print Settings Printer Brand: Prusa Printer: i3 MK3 **Rafts:** No Supports: No **Resolution:** Adaptive 0.1 Infill: 15 Category: Household
This Lamp holder is designed to hang a lamp on a ceiling. If you are like me and have a dozens of old ropes in your cellar this design might be for you. It's designed in FreeCAD 0.20 and highly adaptable through a spreadsheet, so feel…
It fits my radio with enlarged type-c battery OnShape Source Print it with TPU, angled at 45 degree with organic supports, 100% infill
Rock wall holds for your fridge or magnetic surfaces. Designed for 2x6mm magnetic disks. There is also a “nut” file that you can print in a different color and attach on the inside hole before gluing the magnet in place Please give…
Within the new climbing hall of our DAV section we needed a way to mark the ropes somehow to know how old they are and on which route they were originally deployed. So i developed this little helper to mark the robes with an Edding3000 in…
Adapted to work for this golf ball retriever, however this is a really generic one, so should work for other generic ones too! https://www.amazon.com/dp/B0CBRTRP66
30mm with a 5mm fillet so it might feel a tad smaller. I glued 150 grit sandpaper inside.
Supports for holding a carpet roll in place securely while your kitty can climb away! It is NOT meant to be hanging/weight-bearing. While I believe it could be made to do this, considerations would need to be made and I have not tested…
Signs for recreational activity areas.
When you build your climb wall you want alot of variations so I thought Ill share some. I recommend 30% infill 0.2 layer And a filament that is called HT-Pla matt , from Addnorth. it is more durable. (remember this is a build for my…
Print in place and no supports needed. This is an easy to print rope climbing toy inspired by old German Climbing Woodpecker toy. Toy climbs up as you pull the rope down and release it. Learn about friction and hinge joint while having…
Not only can you clip bolts, but you can also place the rope back into the draw or retrieve the quick draw on those failed climbs. No more bail biner to sacrifice to the gear gods. Has a hole in the centre to attach to your harness or…
This is a modular hangboard system for training finger strength and finger health for rock climbing and bouldering. This modular hangboard system is made to be supported by a wood board in the back. I glued two pine boards of 18mm…
This is a fun and creative way to keep your hermit crabs moving all night long. This climbing toy has a base and a disc on top that when assembled correctly, will spin freely for your hermit crabs to walk on. I made multiple designs and…
Belt buckle for Climbing link modeled for use with 2" nylon webbing. Note that it does not act as a buckle, but is rather only a decorative piece. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: .2…
I made a set of grip tools for climbing/armwrestling training All of these models have been tested for about 75kg (with the provided print settings) Most of them are tagged with my online moniker “Bobbzorzen”, feel free to use the fusion…
A simple but cute cartoon otter pair touching the star on top of a christmas tree in christmas tree ornament form. These cartoon otters are the result of the earlier sculpted per-species critters. I highly recommend printing those as they…
This is a recreated 3D model of an available bronze sculpture you can buy online. Requires quite a few supports due to the odd geometry. He's got holes in his hands so you can easily thread the “rope” into his hands. Hope you enjoy.
Inspired by the model posted by NLP customs, but redesigned to be more comfortable to hold whilst retaining all the functionality of the original. The original gear rack has 16 holes for carabiners plus two to attach a helmet, and one to…
I designed a simple but useful wall mountable bracket to hold my climbing rope. The clearance hole on the larger flange is to allow a screwdriver for easier mounting.
Hang board for use for portable training or your own home gym. I used 1100 paracord for the loop but you can use 550 cord as well. Feel free to adjust the size to suit you. I would recommend putting some kind of fuzzy skin on there to add…
I've got a few friends who boulder and so i designed this simple box for fingertape! Easy print, supports needed just for the logos. As always I'm uploading also the fusion data, so change it to your liking. Credits for the SVG - Logos:…
Scratching post i used has M8 threaded rod on one side. This is used to attach to mounting plate that has matching M8 threaded hole in the middle. In my case, i mounted the plate to plaster board with two anchors and screws. Mounting…
3D model description I made these HangBalls for climbers to train pull-ups and finger strength. There are 3 sizes: 25,32 and 75mm diameter. They have all been designed to trick your slicer into adding more walls inside the balls to make…
My take on an easy-to-carry fingerboard featuring 3 edges and a hole. Use a strap in a loop and hang the TriBoard from a tree or a pull-up pole. The 3 different sides work great for different training sessions. The edges are 10, 15, and…
!! This is not meant to use for climbing!! Here is a simple keychain that looks like a climbing grip. It needs 2 screws to be mounted in the wall. And they are 100mm apart at the back of the mountains. I did the mountains in wood with a…
Easy to print plant holder. Insert the plant holder into the aluminum profile of your greenhouse and attach any string or wire. Printing Instructions No supports needed.
This is a multi-function climbing grip/finger strength trainer. **The strength of 3D prints can vary significantly depending on the calibration/filament/temperature/etc. Use at your own risk** Includes: 100mm, 60mm, 40mm, and 20mm pinches…
Keychain/necklace/zipper pull accessory shaped like the pure ice picks for Cassin/CAMP X-Dream ice tools. The modeled size works well as a zipper pull or necklace but if desired you can scale it larger. About 75mm length is a better size…
A very simple plant trellis to support the growth of your climbing green companions! It prints in three parts (all in same plate in the provided 3mf file), to maximize the size of the circles. Dead simple to assemble. The distance between…
Clipstick are a common way of clipping the first quickdraws of climbing routes. However most commercial values are overpriced, and attached to cumbersome extendable poles. Instead this clipstick does not take any space in your bag, and…
This model basically provides a hole that you can use to secure you phone. I use a $1 keychain bungee and lobster claw “carabiner” something like this that is WAY more convenient than string. You end up taking more sweet pictures in…
Ce dossier est une boîte pour vous aider à reconnaître votre magénsie dans la salle d'escalade ! Il est composé de deux parties qui s'emboîtent parfaitement. Pas besoin de colle ! @Cette boîte mesure environ 14,5 cm de haut, elle est donc…
a little climbing hold I made. available with screw hole, keychain hole or both print with fuzzyskin and as low layerheight as possible for best results
Heart Trellis: These heart-shaped trellises are perfect for supporting your climbing houseplants while adding a decorative touch! I designed two versions for Valentine’s Day: one simple trellis with three hearts and a slightly taller…
A climber just coming up over the lip of my floor lamp. Printed in glow-in-the-dark PLA so she is visible for a little while after I turn out the lights. Print instructions Category: Decor Print Settings Printer Brand: RepRap Printer:…
For YY Vertical Nut key ring https://www.yyvertical.com/en/products/climbing-nuts?srsltid=AfmBOoqhDTdhVKe-z6WGEovU55hQf1
Model was printed in PLA with fuzzy skin enabled to make a more rock like model. Model secured to wall with 3m two sided tape.
This is a custom designed holder made for climbing certification cards like the Swedish Topprepskort . It fits standard paper sized cards and keeps them secure and protected during climbing sessions. The holder is designed to easily…
3D Printed parts for FRC team 3038's Shallow Cage Climber mechanism. Our mechanism consists of QTY 1 of 3038-25-P-00-021. Printed in PETG.
Inspired by other ergonomic finger trainers, allows fingers to crimp at differing heights to offer the same engagement reducing risk of injury (not a doctor, please advise). Model is 25mm wide and can choose to crimp at different depths.…
A simple flower climber, that fits MK4 bed. Print all parts or use 3MF file, then assemble the legs to the body. You can use glue to fasten the legs. I did not use glue, mine snaps together without the glue perfectly.
This Climbing Nut Key Holder is a modified version of Falconlmf’s original design, now widened to accommodate more keys and without the indents on the back to allow flat printing without supports. Simply print, mount it using double-sided…
A little robot that hangs onto things with a clawed leg. Depending on print quality, it may also be able to hold very light objects No supports needed for print
Using a clip to secure the plant, rather than tying it to the support, makes it much easier to adjust as the plant grows. Printed in PETG for better temperature resistance for use in greenhouse, but will likely also work in PLA.
