UPDATED: Cat Carpet Climber Pole - Corner Supports for Kitty Climbing -With Cap!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Supports for holding a carpet roll in place securely while your kitty can climb away! With Cap!
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 175
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Supports for holding a carpet roll in place securely while your kitty can climb away! It is NOT meant to be hanging/weight-bearing. While I believe it could be made to do this, considerations would need to be made and I have not tested that. It does, however, firmly hold a carpet roll in place with much of the weight being held by the tube. It is offset so the role will not be directly against the wall - which also allows support over trim.
I used drywall anchors to affix each unit and medium-sized zip ties to connect the brackets. There are small holes on the sides if you wish to try and put a screw in the sides of the tube and support.
I will be making a complete step/areal cat perch soon, with some remixed items and shelves.
Items:
- Used cardboard carpet roll (from a carpet place)
- New or Used carpet cut to fit the carpet roll
- Standard PLA
- Screws/Drywall supports
- Large staples/Staple-gun
- Medium/Large Zip ties (or similar sturdy item)
Update 10.28.24
Added a cap for the carpet roll. About 127mm wide, 2mm thick.