Counting matching models…
I loved “The Climber” by Like_VL but wanted it in another pose so I created this. The magnet I used is 10x10x5mm so the anchorpoint is adjusted for this. I've used superglue and manually melting filament to hold the magnet. I used some…
Plant climber, print without supports Added another flatter version that should print better, as the first one was a bit messy on the stick
I made a little person who looks like they're belaying down your hoodie string. I'm a fan of climbing, and love little “active” accessories, so I thought what better to make for the bead contest than a climber? Works well for most hoodie…
Print as modeled, can be scaled to any amount.
Large climbable corner structure for hermit crabs with removable tray at the top. Add foraging material in the tray and it is easy to remove and clean or empty. Structure is approx. 165x158. I recommend printing with PETG due to the high…
Rock climber climbing a mountain inside a carabiner
This two-story 3D printed hamster house offers a charming haven for your tiny explorer. The rounded base boasts a small, inviting entrance on the side, welcoming your hamster inside. A sturdy ramp guides them up to a spacious second…
this is the man climbing with rope made out of standard 3d model of blender and
Two small light bulbs with sockets, colorful textile cables, some steel wire and cable isolation combined with simple 3D prints make up a beautiful climbing lamp. Print instructions Disclaimer This lamp requires the skill to work with…
Minimal recommended size is 4x, printed laid flat, with tree supports. The vine parts are quite thin compared to the frame so make sure the supports you are selecting will be possible to remove after printing without damaging the vines.
I wanted my Lucky 13 to climb my Lack enclosure! This is just a new waist with a loop for 1.75mm filament!
This is a climbing hook for FTC Robotics for the 2023-2024 Season. This was designed for our 7th grade teams to assemble and learn the advantages of 3D printing. The climbing hook is made to be mounted to the Gobilda viper slide cable…
The Climber. Climbers, potholers, mountaineers and everyone else who loves challenges this Fridgemagnet, monitor decoration, time telling or milestone reminder this is for you! Designed for use with 8x3mm magnets, prints without supports…
New version V2 (Reduces filament usage and printing time in half. It also works with 4 sticks instead of 3, making it more resistant.): https://www.printables.com/model/577962-plant-climber-structure-for-tomatoes-beans-and-cli In Spain,…
Introducing my latest creation: House Plant Bee Climber . Key features: You can remix & improve the model freely! All the files are orientated for convenient printing in STP, STL & 3DM formats! No supports are required! Easy fast &…
What goes together better than butterflies and plants? I designed this butterfly style plant climber trellis to allow it to be printed with zero supports for ease of printing. The design intent is to be able to stack more and more on top…
Plant climber inspired by stained glass window
Support for plant. Easy to print and modular. Allows to add extra length when the plant grows. Print settings: Material PETG (but can be printed with others). Layer height 0.2, 6 perimeters and infill 25%.
This simple but cute cat shaped plant climber is modeled in Fusion360. The size is fitting Prusa Mini+ but its necessary to remove the skirt in slicer. I printed it with Mystic brown PLA Prusament, nozzle 0,4mm and 0,2mm layer height.…
I created this for the climbers contest and wanted to create an upside-down climber that is easy to make. put double sided tape and hang it on a wall for the plants to climb down from it, into it, whatever… Happy printing
Add a rugged, adventurous vibe to your workspace with this rock climber accessory designed for PC monitors or any screen. Crafted to resemble a daring climber scaling a peak, it securely attaches to the corner of your monitor using…
Bonitas siliuetas de llavero para escaladores o imanes de decoración
Pot size is 180x240x120mm, and includes a drip tray in model Use M3-8mm screw & nut to secure trainer/climber to pot. If using more than a couple trainers/climbers then best to tie the highest one to something above Designed to be printed…
Plant climber for contest Prints on the side, no supports
HexaGrowth's design is inspired by the natural symmetry and efficiency of hexagonal patterns found in nature. This geometric marvel combines aesthetics with functionality, seamlessly integrating into any architectural setting. Its modular…
Use the Cucumber Climber as a stylish support for any plant or as a marker to identify where cucumbers are growing. Notes: You may scale the model size as needed Shown as printed with Bambu Lab PLA Basic - Red Thank you for stopping by…
This Plant Climber/Supporting Frame design is very modular and could also be printed at 75% if needed. You can also use just three section to join up - pictures show four section per level. For base you'll need the spikes which could be…
Show your plants the sunshine of your love! A small model i made for the prusa contest. It was designed to be easy to print, without supports, hence the rather flat model. Feel free to bring up any issues this model may have, and i'll try…
A dragon you can stick in your plant pots or in your garden. This is an easy print. I reccomend PETG or ABS. Category: Outdoor & Garden
parche o llavero reescalandolo
I needed a plant climber and also needed a hygrometer stand. Why not two in one? That's what this is. Looking at various plant climbers, I really liked the original model by mcko and decided to add a hygrometer attachment ring to it.…
A 2D Spiral Plant Cllimber companion for your plants, guiding them skyward through botanical adventures.
This is a cute panda/bamboo plant guide/climber that fits in any planter/garden! Every piece can print in place without supports, and the bamboo sections are set up so that you can print however many pieces you need (just make sure to…
a leaf-shaped Plant Climber it sticks with the same soil in the pot
This version uses half the filament of the previous version and is lighter. It also works with 4 reeds instead of 3, providing more resistance to the structure. It can also be stored better. I'll upload the photos as soon as I have it…
Designed and printed this to fit the stair climber at my local YMCA gym. It is intended as a phone/tablet shelf and just clips on the top of the unit. The existing shelf from the manufacturer is too low, at least for taller people. If you…
A Farmyard Friend Ready to Conquer Your Desk Meet the most adorable little mountain climber! This charming 3D-printed goat figurine captures the rugged, spirited energy of the animal in a delightfully chunky, "chibi" style. With its…
Conquer new heights with this incredible mountain climber 3D print STL model that captures the spirit of adventure in stunning detail! This expertly crafted figurine showcases a determined climber complete with authentic gear, textured…
An effortless method to encourage them to gracefully take on a beautiful and well-defined look. (supports needed for the stick or print separate using cura mesh tools to split)
This mandala can be hanged on a wall above a plant and serve as a climbing support. It is divided to 4 parts, at 100% scale it has 30cm diameter.
A climber just coming up over the lip of my floor lamp. Printed in glow-in-the-dark PLA so she is visible for a little while after I turn out the lights. Print instructions Category: Decor Print Settings Printer Brand: RepRap Printer:…
A climber made of five braided sines. Should be printed upside-down without supports. If using a bedslinger, align the model with the y axis to reduce the chance of the model falling over during print.
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
The spike on my plant climber rotted away and broke. So I designed this replacement spike. It was designed to fit the plant climber “Rankstab Kokos 80 cm” of the German hardware store brand Toom. It runs under the article number 4254800.…
Summary: This is a model of a mountain climber climbing a mountain. The model is print-in-place with no assembly. Print Settings: Layer height: .20mm Supports: Organic supports are needed only on the build plate Skirt, Brim, Raft: No…
Hi, for your information, this is work under progress and will developing form time to time. RFDM Adjustable Plant Climber is a plant climber and it is very convenience with it adjustable height, and no matter what is the situation you…
A simple flower climber, that fits MK4 bed. Print all parts or use 3MF file, then assemble the legs to the body. You can use glue to fasten the legs. I did not use glue, mine snaps together without the glue perfectly.
Shock absorbing plant climber - Printed pictures to follow soon Design by R_vdk Design date 03/09/2023 Printtime 16h 44min (total) Weight 127g (total) Dimensions 237 x 85 x 85 mm (excl. optional leg) Application / Functions A simple and…
Fridge climber, for one 2x8 mm magnet. Print without supports. On the right or left side.
a simple cup holder for my inmotion climber scooter, the post is about 1.75" deep by 1.5" across, if yours is similar it should fit. i did leave some room on the sides to add window sealing sticky padding to keep it in place and not slide…
Print in place, supports are not needed, but may be good.
It is a Plant Climber but the top is shaped like a Olympic symbol :) Maybe u need to print bigger or smaller, depends on your pot
Two parts, both printed with layer 0.15 and quality settings, supports: organic, on the bed infill: 20% 1 x bolt with nut M3 (holes needed little patience) printer: MK3S+ Prusa Carabiner needed for safe lock.
Try to drink your beer without dropping it. Perfect after a climbing session.
This plant support is 7 inches tall. You can scale it up in your slicer if you want it larger. The arms on the sides will support the vines of your favorite house plant.
An elegant maple leaf-shaped plant climber, blending art and function to elevate your greenery with style
Lemmings is a cult 90s game where the player helps tiny creatures reach the exit by assigning them different tasks. The game combined logic, humor, and pixel art. More lemmings are coming soon to my collection – until the whole family is…
Supports for holding a carpet roll in place securely while your kitty can climb away! It is NOT meant to be hanging/weight-bearing. While I believe it could be made to do this, considerations would need to be made and I have not tested…
The GIF is the real motion computed by the physics model (stick-slip with friction), rendered frame by frame: the classic woodpecker toy that pecks its way down a pole. Lift the bird to the top, tip its tail down a little and let go: it…
A pot/planter for any vine plant like tomato. Modular, easy to adjust. The first version has every part but the biggest part is made for my 300x300 plate. There is a second file adjusted for 250x250 plates Vine parts can be weak, with 2…
Part of the front suspension broke - here a spare part. FreeCAD file included
3D Printed parts for FRC team 3038's Shallow Cage Climber mechanism. Our mechanism consists of QTY 1 of 3038-25-P-00-021. Printed in PETG.
J’ai modélisé le jeu CubeClimbers car il était impossible à acheter dans mon pays. Étant passionné par ce jeu et son concept, j’ai décidé de le recréer moi-même en 3D afin de pouvoir en profiter malgré son indisponibilité. Ce projet m’a…
This is a rock-climbing -inspired grip mug designed for people who like rugged, functional objects, and are fans of rock and mountain climbing. The cup features a raw rock-style textured section that improves grip and gives it a bold,…
Just a nice little tree I designed for all my climber friends. Print it, send it, happy climbers:)
I have printed the toolbox with PLA and I used 100% infill. The reason for the two designs are that my first print had an issue with the support.
A pot/planter for any vine plant like tomato. Modular, easy to adjust. The first version has every part but the biggest part is made for my 300x300 plate. There is a second file adjusted for 250x250 plates Vine parts can be weak, with 2…
This build is part of XBS (Experiential Build System), a modular catalog of parts designed for the XRP. XBS allows users to easily add mechanical functionality to the platform for competitions, automation, and fun. The Climber is designed…
Ninjago Climber shoulder pads from Season 2 of Dragons Rising! Design is based on the show. Parts are split by color for the gold decorations. Can be done with multicolor printer, although I found it looks better with printing separate…
🧗 Climber Cable Organizer – Decorative Cable Hook (5–10 mm) Give your cables a sense of adventure! This climber silhouette cable decoration transforms ordinary wires into a vertical scene full of motion and character. Whether it’s for…
This is a remix of the awesome Thin Man model by Tosh. I revised it to make it hang on a bit better (longer arms). Created also a reversed version. Quick and easy to print requires no supports and minimal infill.
A new 3D figurine generated by AI, a Chibi Climber. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the camera…
This build is part of XBS (Experiential Build System), a modular catalog of parts designed for the XRP. XBS allows users to easily add mechanical functionality to the platform for competitions, automation, and fun. The Climber is designed…
A cute little cat climbing playfully on a rustic hook — the perfect functional hanging decoration for your home! Perfect for: Hanging securely over the rim of plant pots (as shown in the photos) Shelves, windowsills, thin boards, and…
Decorative element and object holder such as screwdrivers for SKADIS panel in the shape of a climber
Here I have a trophy for you with a custom stone base and a carabine ! To assemble this trophy, just take the printed parts (without the supports under the main part) and slide them together. The sign can be described with any text you…
Can be printed without supports. Looks best with wood fill filament
Das 3D-Modell zeigt einen männlichen Charakter, der auf stilisierte Weise an einem herunterhängenden Kabel hinaufklettert. Der Mann ist in einem künstlerischen Stil gestaltet und trägt keine Kleidung. Er hängt an einem Seil oder Kabel und…
Print both climbers upside down Didnt have a chance to print yet, should be doable without supports, will update when done
Prints without supports. Print as many as you like depending on the length/growth stage of your climber!
Need support, scale the size if you need. How to use: 1. Print the model 2. Get a plant pot 3. Put soil in 4. Put Seed in 5. Put the Prusa Text Plant Climber 6. Watch the plant grow up with the text
I've included two versions, standard being smaller and flimsier, Tall and Thicc being the bigger and sturdier one. Print laying down with no supports, scale as needed. My pictured print was printed in Bambu ASA at 0.2mm layer height and…
Discover an effortless method to nurture your plants, encouraging them to gracefully take on a beautiful and well-define
It is said that plants respond to music, they even grow faster when they hear music. We also love music, so why not show it and help this little plants grow. It can be printed without supports. If it is for the garden or for the flower…
this model includes a short and tall version of the base with extensions that can be tied or joined together for taller plants. no special print settings should be required to print successfully but make sure the print is strong enough to…
print without supports check out my other stuff! : https://www.printables.com/@Popcop12_1145507/models
I used this style for lampshade and coin holder but this easier version can be used also for flower support.
