Climbing Hold Magnet
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.46 – €5.45 net (excluding VAT)
For file: Magnets Set 0.1mm_PLA_MK3S_6h34m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.95 excluding VAT (range midpoint).
- Weight reported by the author
- 33 g
- Print time reported by the author
- 6.34 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Little Climbing Holds for fridge or metalic surface.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 13
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
I used 6mm X 3mm round magnet. The hole is 6,2mm of diameter for a snug fit, you just have to press down the magnet flat on a table.
If you use the STL files, for a textured hold use the fussy skin option; the g-code files have already the fussy skin on the models.