1 / 2
Grow Tent Hangar Clip for 16mm Poles - great for trellis supports — image 1
1 / 2

Grow Tent Hangar Clip for 16mm Poles - great for trellis supports

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A hanger clip that clips around 16mm grow tent poles (the most common pole size). Works great for trellis support!

Rating
5 / 5
Likes
76
Downloads
479
Makes
1
Views
1,387
Reviews
2

Updated at source:

Model information

Category
Tools
License
Creative Commons — Public Domain

Just a quick hanger/clip for grow tent poles (16mm, most common size). Works well for trellis support, and LST anchoring.

Recommend adjusting print height and fill based on strength needs (whatever you're tying down / supporting)

These let a Phlizon Cob Series 3000W (~22lbs) hang off of it amazingly. Just make sure you print them thicc enough - adjust their print height in slicer, which is easy to do. If hanging heavy stuff, I would suggest printing with PETG and not PLA.

For trellis supports, or things that don't need huge holding power, adjust down in thiccness. A few MM thick is all you need for most applications.

Tags