Grow Tent Hangar Clip for 16mm Poles - great for trellis supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hanger clip that clips around 16mm grow tent poles (the most common pole size). Works great for trellis support!
- Ocena
- 5 / 5
- Polubienia
- 77
- Pobrania
- 481
- Wydruki
- 1
- Wyświetlenia
- 1396
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Just a quick hanger/clip for grow tent poles (16mm, most common size). Works well for trellis support, and LST anchoring.
Recommend adjusting print height and fill based on strength needs (whatever you're tying down / supporting)
These let a Phlizon Cob Series 3000W (~22lbs) hang off of it amazingly. Just make sure you print them thicc enough - adjust their print height in slicer, which is easy to do. If hanging heavy stuff, I would suggest printing with PETG and not PLA.
For trellis supports, or things that don't need huge holding power, adjust down in thiccness. A few MM thick is all you need for most applications.