RC Trabant Combi 601

If you have a problem with the building, write to me

  Sorry fo quality 

 Information

  In the photo you can't see the lens on the lights and mirrors and also in the photo the body connection    is different now it is on pins for a precise connection

  Cosmetic parts are glued and structural parts are screwed together.

  The motors are held on zip ties for good height adjustment.

 Print setings

    Colored parts

      The difference between the print files is that it is already colored for printing with mmu, otherwise                  the files are exactly the same.

      It is ready to print with mmu3 here are the colors of the converter:

     Rear body

     1 : yelow 2 : grey 3 : red 4 : grey / black 5 : red / orange

     Front body

     1 : yelow 2 : grey 3: red

     Front , Back chassis

     1 : yelow 2 : grey

    Info setings

     In the print files there is 0.2 quality for cosmetic parts and 0.25 for parts that are not visible,                       everything has a fill of 15%.

     When you make your settings, try to make the parts strong Construction parts, you can adjust the               tires according to your needs, you can try PLA or similar materials.

 Material list

   Screws

      M4-2X 30mm,2X 15mm

      M3-4X 10mm

      M6-2X 25mm,1X 120mm

   nuts and washers

       M4 nut-4X

       M4 washer-6X

       M3 nut-4X

       M6 nut-6X

   Electronics

        1X-ESP 32

        https://tinyurl.com/22ferxbj

        1X-Breadbord

        https://tinyurl.com/3aww3zc6

        2X-H-Bridge

        https://tinyurl.com/47sb3yt2

        1X-N20 motor

        https://tinyurl.com/3dhe3j98

        1X-worm gear motor

        https://tinyurl.com/ymhv6j3r

        2X-LED light

        https://tinyurl.com/h5cmzfyc

   Other

           4X bearings inner 6mm outer 19mm

          glue

          zip-tie

          bearings inner

          vaseline

          tin foil

 Code

         Libraries are needed for proper functioning : RemoteXY , Ardurino ESP 32 Boards .

        The code is functional in arduino ide

       It is necessary to have the RemoteXY application downloaded on a mobile phone with Bluetooth.

---

        If there is an error in the code, write to me.

#define REMOTEXY_MODE__ESP32CORE_BLE
#include <BLEDevice.h>
#define REMOTEXY_BLUETOOTH_NAME "Trabant V"
#include <RemoteXY.h>
#pragma pack(push, 1)
uint8_t const PROGMEM RemoteXY_CONF_PROGMEM[] =
{ 255,5,0,0,0,98,0,19,0,0,0,84,114,97,98,97,110,116,32,86,
  49,0,31,2,106,200,200,84,1,1,5,0,1,248,31,57,57,18,5,24,
  24,0,2,31,0,1,248,119,57,57,18,49,24,24,0,2,31,0,1,39,
  81,57,57,121,34,24,24,0,2,31,0,1,60,83,57,57,171,34,24,24,
  0,2,31,0,2,38,7,23,52,83,10,20,13,0,2,26,31,31,79,78,
  0,79,70,70,0 };
struct {
  uint8_t button_01; 
  uint8_t button_02;
  uint8_t button_03; 
  uint8_t button_04;
  uint8_t switch_01; 
  uint8_t connect_flag;
} RemoteXY;
#pragma pack(pop)
#define PIN_BUTTON_01 2
#define PIN_BUTTON_02 4
#define PIN_BUTTON_03 18
#define PIN_BUTTON_04 19
#define PIN_SWITCH_01 5
void setup() 
{
  RemoteXY_Init ();
  pinMode (PIN_BUTTON_01, OUTPUT);
  pinMode (PIN_BUTTON_02, OUTPUT);
  pinMode (PIN_BUTTON_03, OUTPUT);
  pinMode (PIN_BUTTON_04, OUTPUT);
  pinMode (PIN_SWITCH_01, OUTPUT);
}
void loop() 
{ 
  RemoteXYEngine.handler ();   
  digitalWrite(PIN_BUTTON_01, (RemoteXY.button_01==0)?LOW:HIGH);
  digitalWrite(PIN_BUTTON_02, (RemoteXY.button_02==0)?LOW:HIGH);
  digitalWrite(PIN_BUTTON_03, (RemoteXY.button_03==0)?LOW:HIGH);
  digitalWrite(PIN_BUTTON_04, (RemoteXY.button_04==0)?LOW:HIGH);
  digitalWrite(PIN_SWITCH_01, (RemoteXY.switch_01==0)?LOW:HIGH);
}

---

Future

New plans are: taillights, turn signals, suspension, differential, magnetic body mounts, better wheels and other minor modifications

Planned release April - May

If you buy this model, you are not only supporting me, but you are also opening the way for my next project. Thank you very much.