1 / 1
Cleaning up the front doors of the enXLosure
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I love the enXLosure. It's getting me temps almost to 50C. I found that the front end didn't fit together as expected
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 202
- Wydruki
- 9
- Wyświetlenia
- 1282
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 9) (Komentarze: 14)Remiksy (0)Kolekcje (92)Powiązane
These changes clean up the front a little bit so everything fits together better and you have a little adjustability with the front doors. I printed these in Priline Super Hard Polycarbonate Carbon Fiber with a scale factor of 0.35%. You need to use support to print the edge front.