Prusa XL Screen Guard for EnXLosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Prusa XL screen guard for the EnXLosure (A very nice minimalistic enclosure), similar to the regular Screen Guard
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 79
- Wydruki
- 4
- Wyświetlenia
- 942
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
A redesign of the Prusa XL screen guard, but compatible with the EnXLosure (A very nice minimalistic enclosure). It is slightly less wide, and fits together with a set of doorstops compatible with the enXLosure.
You can re-use the magnets of the original Prusa enXLosure doorstops (2x 6x3mm round neodymium magnet, 3mm high) and re-use the screws and inserts of the original Prusa XL Screen Guard (2x M6 screws 30 mm, 2x M6 profile inserts)
For optimal strength print vertically, use an aditional perimeter and 25% or higher infill.
*I did not add tools holders, as I prefer to store these separately, but if there is an ask, I'm happy to add them