Prusa enXLosure - Connect enclosure parts with square nuts / Einhausungs-Teile mit Vierkantmuttern verbinden
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connection without melt-in threaded but with square nuts / Verbindung ohne Gewindeeinsätze dafür mit Vierkantmuttern
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 322
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Care was taken in the design to ensure that no melt-in thread inserts are required on the entire housing.
Instead, the construction was designed with square nuts measuring M3 x 5.4 mm x 2.4 mm (M3 x 0.21 In x 0.0.9 In).
This means that approx. 20 more M3x10 nuts are required than in the original specification.
Das Design wurde so ausgeführt damit an der gesamten Einhausung keine Einschmelz-Gewindeeinsätze benötigt werden.
Die Ausführung wurde stattdessen mit Vierkantmuttern mit den Massen M3 x 5,4 mm x 2,4 mm designed.
Das bedeutet, dass ca. 20 Stück M3x10 Muttern mehr benötigt werden als in der ursprünglichen Spezifikation.
Amazon square nuts / Vierkantmuttern:
