1 / 4
Prusa enXLosure - Connect enclosure parts with square nuts / Einhausungs-Teile mit Vierkantmuttern verbinden — image 1
1 / 4

Prusa enXLosure - Connect enclosure parts with square nuts / Einhausungs-Teile mit Vierkantmuttern verbinden

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Connection without melt-in threaded but with square nuts / Verbindung ohne Gewindeeinsätze dafür mit Vierkantmuttern

Rating
0 / 5
Likes
4
Downloads
24
Makes
0
Views
322
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Care was taken in the design to ensure that no melt-in thread inserts are required on the entire housing.
Instead, the construction was designed with square nuts measuring M3 x 5.4 mm x 2.4 mm (M3 x 0.21 In x 0.0.9 In).
This means that approx. 20 more M3x10 nuts are required than in the original specification.

Das Design wurde so ausgeführt damit an der gesamten Einhausung keine  Einschmelz-Gewindeeinsätze benötigt werden.
Die Ausführung wurde stattdessen mit Vierkantmuttern mit den Massen M3 x 5,4 mm x 2,4 mm designed.
Das bedeutet, dass ca. 20 Stück M3x10 Muttern mehr benötigt werden als in der ursprünglichen Spezifikation.

Original EnXLosure
 

Amazon square nuts / Vierkantmuttern:

INCREWAY 200 Stück 3 mm Edelstahl M3 Vierkantmuttern, Gewindemuttern, Maschinenschraubenbefestigungswerkzeug : Amazon.de: Baumarkt

 

 

Tags