1 / 5
EnXLosure Top R2 80mm Active Heating Hole 80mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To use with an Active Heater to blow warm air from above into the chamber.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 499
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (20)Powiązane
To use with an Active Heater to blow warm air from above into the chamber. The “cold” air needs to be sucked from down the chamber up with a pipe. For the added weight, i added dupport beams.
There is a second file that has support included.
After many asked me how they could support me, you can now
Tip me on KO-FI by klicking here: