1 / 12
Power adapter for screwdriver Grand DA-12 M
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter allows you to operate from a 12V power supply without a battery.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Standard Digital File License
I made this adapter after my screwdriver started to discharge quickly. Now I can work from a 12V power supply while my batteries are charging.
For assembly you will also need:
- 2 DJ621 terminals
- MR30 connector male/female (it would be correct to use an XT30 connector, but I did not have one on hand)
- 2 wires to connect the terminals and the connector inside the adapter
- 3 screws 3 * 16 mm
- 2 screws M3 * 15 mm and 2 nuts
Also note that the power supply must be rated for high current, at least 10 A, better more.