Airvape Legacy Pod Container v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated version of a useful tool, fixing some issues.
- Ocena
- 4,5 / 5
- Polubienia
- 4
- Pobrania
- 59
- Wydruki
- 1
- Wyświetlenia
- 336
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution
Reduced the size to hold 6 pods. The original design had very little clearance, the holder (drawer) didn't even go in for me. So I enlarged the size of the case to fix this.
Also, when opening and closing, sometimes the holder was moving up and down inside the case, causing it to get stuck, again. So I added rails to fix that, with enough clearance included.
UPDATE: The handle is now much easier to grab.
Printed fine on K1 with standard nozzle. It's always a good idea to print with lower layer heights with models that tightly fit, so I'd print this with 0.1 mm layer height.
No supports needed for the case
Supports needed for the holder.
Print orientations should be correct.