Airvape Legacy Pod Container v2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Updated version of a useful tool, fixing some issues.
- Rating
- 4.5 / 5
- Likes
- 4
- Downloads
- 59
- Makes
- 1
- Views
- 336
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution
Reduced the size to hold 6 pods. The original design had very little clearance, the holder (drawer) didn't even go in for me. So I enlarged the size of the case to fix this.
Also, when opening and closing, sometimes the holder was moving up and down inside the case, causing it to get stuck, again. So I added rails to fix that, with enough clearance included.
UPDATE: The handle is now much easier to grab.
Printed fine on K1 with standard nozzle. It's always a good idea to print with lower layer heights with models that tightly fit, so I'd print this with 0.1 mm layer height.
No supports needed for the case
Supports needed for the holder.
Print orientations should be correct.