Kobra 3 Poop chute
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small chute to redirect the poop from the Kobra 3 to a bin under the table(Ikea lack).
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 129
- Wydruki
- 0
- Wyświetlenia
- 2081
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I needed a way to redirect the poop coming from my Kobra 3 printer to a bin under the table.
the chute is attached to the table using VHB or any double sided tape.
---------
It works well together with this poop diverter that you attach to the X gantry.
https://www.printables.com/model/935600-anycubic-kobra-3-filament-poop-diverter-anycubic-k
---------
The Original version is printed with the funnel up and some tree supports, 5% infill works fine and I used Polyterra PLA or Clas Ohlson PLA for the print.
2024-10-10
The 2.1 version is printed with the lower chute on the build plate, and three supports.
I have also tested to coat the inside of the chute with Slice engineering plastic repellent paint instead of painters tape.
I have also added to painters tape to the inside of the chute and funnel to prevent the plastic from sticking to the sides.