Kobra 3 Poop chute
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small chute to redirect the poop from the Kobra 3 to a bin under the table(Ikea lack).
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 129
- Makes
- 0
- Views
- 2,082
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Public Domain
I needed a way to redirect the poop coming from my Kobra 3 printer to a bin under the table.
the chute is attached to the table using VHB or any double sided tape.
---------
It works well together with this poop diverter that you attach to the X gantry.
https://www.printables.com/model/935600-anycubic-kobra-3-filament-poop-diverter-anycubic-k
---------
The Original version is printed with the funnel up and some tree supports, 5% infill works fine and I used Polyterra PLA or Clas Ohlson PLA for the print.
2024-10-10
The 2.1 version is printed with the lower chute on the build plate, and three supports.
I have also tested to coat the inside of the chute with Slice engineering plastic repellent paint instead of painters tape.
I have also added to painters tape to the inside of the chute and funnel to prevent the plastic from sticking to the sides.