Modular - Multi peg hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A multi-peg hangar for drying small items
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Being a father of a newborn, having decided to use re-useable nappies, wipes and liners, we were quite amazed by the amount of small things to dry. We filled an entire line with items a little smaller than socks. We already had a hanger, but we really needed something with LOTS of pegs. So I designed this!
That said it's designed for sock size items, I would imagine this struggles to hold wet t-shirts before you try it and become disappointed.
I printed it entirely on a Bambu A1 mini, so most printers should have a big enough build volume.
I am trying to weekly design something in an hour, and this was last weeks design, it took 3 hours in the end admittedly, hope you enjoy it!
Print settings/materials
There is nothing overly complex about the build, just a few things to note:
- I printed using PETG, worked a treat, ABS might warp a bit for the long parts, so maybe fibre filled if you insist on ABS or ASA.
- For the centre piece, a tree support will do the trick, in fact tree supports are handy for the slight over hang of the dove tail joints
- For the split ring linked below, I used a 0.2mm nozzle, I tried on 0.4mm, it works, just not as nice
- Use a higher infill, >50% to give the structure required for the wet items
I remixed this model for the peg:
https://www.printables.com/model/904305-clothes-peg by ArgiCZ
I added a link on the top of the peg and a linked clip to clip onto the main structure, the bellow model can link them together.
I use this model for the peg links (not included in the files here, follow the link):
https://www.printables.com/model/119654-split-ring-6-sizes (easy to print, oval, no3)
and for the carabiner to hang to the line (not included in the files here, follow the link):
https://www.printables.com/model/267210-the-suicide-carabiner (standard)
Assembly
Assembly is all split dovetail joints, and 100% 3D printed. I needed a small hammer (200g) to tap it together but don't hit it too hard, just persuade it in. If you need a larger/smaller tolerance, from me a comment.
Support me!
Designing costs money! If you appreciate what I do and the files I am sharing please consider supporting me on Patreon:
https://www.patreon.com/LynchEngineering
Or buying me a coffee: