Liczymy pasujące modele…
Snappy is a chubby little gator with a big smile and even bigger charm! Whether you keep him on your desk, gift him to a friend, or turn him into a keychain buddy, he’s ready to snap into action. This one-piece monocolor 3MF prints smooth…
An easy to print snappy fidget toy. https://youtu.be/HrO0uZ5QgzI Printing All parts can be printed without supports. Add a brim if your printer has any difficulty with curling around sharp corners. The Button caps can be printer either…
Other fidget models have a greater resistance, because they have more points of contact or are stuck together closely This one does not I have printed this design in PETG and PLA and either provides the same expeirence
This dodecahedron-shaped box with a snap on lid. https://youtu.be/ia2_srxa-og Printing Requires good tuning for a nice fit. No supports needed. Experiment with adding a slight fuzzy skin for a pleasant surface finish. You may get a faster…
The SnapRack system is designed to easily reconfigure your sample handling rack on the fly to suit the needs of your current task. It fits 1.5, 2.0, 5.0, 15, and 50 ml tubes/falcons. Whether you want to pipet a master mix from a 15 ml…
Print 3 digit rings, 1 shaft and 1 end cap, slide the rings onto the shaft (check that they all have the same orientation) and finally push on the end cap. If the end cap is too loose, a dab of glue should fix it. If it's too tight, try…
I enjoyed how the original snappy doors work, so I took the time to assemble them into separate ‘plates’ for ease of printing.
I’d like you to meet Snappy, a little crocodile with a big personality! 🐊 He’s got those classic croc teeth, but don’t worry—he’s all about fun and games, not chomping down on anything. Do you like this cute crocodile? If you'd like to…
This Snappy Fidget Button remix arranges the buttons into a honeycomb pattern. It uses the springs from the original Snappy Fidget Button and the round buttons from the Round Snappy Fidget Button remix by bnorick .…
Created a weekly pill organizer that is big enough to fit all your pills but small enough to throw in a pocket or take on the go. What makes this pill organizer special is that it clicks open only as far as each day with a snap so that…
I added left and right sloped hats as well. Printed with PLA (GD Filament) on Prusa MK3S+.
I printed the tall version of the Snappy Fidget Button by 3D Printy and liked it. After using it a bit, I thought a round version might feel better in my hand. Turns out it does, so I figured I'd share it for others. This print includes…
If the original version was too small, you can enjoy large versions now :). Printing All parts can be printed without supports. Buttons can be printed face down without supports. Customization Spring Options Stiff Normal Soft Assembly…
EN : The money clip can also be used as a staple in the office or wherever you want to stick something together easily. Slicing is best with 0.1 or 0.15, but 0.2mm is also possible I have used 0.15 in the existing gcode files. In…
Meet your new, fun, little friend. Drive him around a rough surface and he will talk, or even snap at you - If you are lucky. The whole toy only consists of 5 parts. The body and 4 click-on wheels. The body is print-in-place. You may have…
Becoming a new parent means optimising everything — and for me, that absolutely includes 3D printing. After realising our full-size nappy bag (diaper bag for non-Aussies!) was overkill for quick outings, I designed a compact,…
I didn't like any of the existing expo marker holders and my dry erase board in my office isn't magnetic so I needed something that could clip onto the tray. Features : ✓ Prints flat with no support ✓ Uses minimal material ✓ Markers can…
I liked the Folding Under Kitchen Cabinet Fruit Hook (e.g., bananas) design by dmacnulty but I didn't have any of the assembly hardware: M3 bolt or M3 nut. So of course the best option is to spend hours on a remix—instead of just buying…
Storage of Make It Snappy self centering hinge drill bits (model #: 40050) in a modern gridfinity bin
Remix of the linked cable organizer with added features to the model which make it snappy to the lock position. Print settings: - Material: PLA - Nozzle: 0.4mm - Layer: 0.2mm - Profile: 0.2mm structural - Supports: no Made with passion by…
Marker ring for Zombicide figurines. The rim is a little thicker in two place so that it snaps into place nicely. Works in PLA (if your printer is well calibrated). The hole in the bottom is for easier removal. Category: Toy & Game…
The doors in the original design sometimes fell shut unintentionally, because the fit was quite loose. To fix this, I added a small block to each doorframe to create a compliant mechanism so that the doors snap in the closed and opened…
Snappy the Crocodile Clip can't wait to sink his teeth into reducing food waste! Print off the two parts and use a short piece of 1.75 mm filament as the hinge pin. He works great in PLA and prints in under an hour at 0.2 mm layer height.…
This is nearly identical to the original blight token model by Daniel Cox , but the parts snap together and print slightly better (thicker features). Hopefully this will prevent them from falling apart when the PLA of the bottom part…
Snappy is a super satisfying, compass-style snap-action fidget toy, which gives a satisfying click feel and sound as it snaps. Made from only 3 printed parts, Snappy is quick to print and very easy to assemble. You'll just need 8 x 5x3mm…
This is a guide cone and funnel to help refill angelcare nappy bin cartridges. The tamper can be used to help pull the guides off before putting the original lid back on and secure with printable clip.
Kooperationsprojekt mit einer Schule in Weingarten. Der LUGO Snappy druckt den Snappy der Schule aus. Firmware selber geschrieben Diverse Upgrades vom orginal Snappy 3.1 Projekt. Die Snappy Teile selbst sind auf einem Mk3 und Mk2.5…
This little helper is very easy to print AND to use. All you need is the holder and two fins. You can use a little piece of 1,75mm filament as an axis for both fins. How to use (see pics): New toilet paper rolls have to be inserted from…
To organize most long cylindrical tools with a diameter < 30 mm I'm planning to make a longer and a short version soon. Don't hesitate to ask in the comments if you have any size requirments. Thanks @ JoeMalovich for the original idea :)
I spend a lot of time tweaking my printers, and I'm constantly on the lookout for models that give me a decent idea of how well the printer is functioning. While cleaning out some old prints, I found dozens and dozens of calibration cubes…
I added a keyring to the top of the tall version because keychains :)
I thought the experience of using the poop bag roll could use some polishing, so I made this
The goal was to create a version that was even smaller. To achieve this, the shaft was modified to be even shorter and have only two digits.
PLA or PTEG Layer height: 0.2 mm Infill: 20% Supports: None Brim: None Printed on Prusa Mk3S Just print as many as you need and snap ‘em together.
The Nappy-Bin-Refills are a bit more voluminous than other and did not fit in the original design. So I made it new from scratch without the hooks and with inner space increased from 22mm to 26mm. Print Settings Printer: FIashForge…
This variant of a Logitech K860 ergonomic keyboard foot comes with a flex. Quite literally. The "legs" are bent outwards by 3° each, giving it a perfect snug snap fit into the keyboard. This fixes the problem I've had with the other…
All part can be printed without supports and without color change mid print. You only need red,green and another color filament. tolerances are critical for a smooth snappy operation of the checkmark switch. No glue or screws are needed,…
Intro Snap and stack these little crates together! This tiny snappy crate clicks together satisfyingly, with a lid that also snaps nicely in place. Use it as a fidget, or a nice display item in your garden! Print Settings Reccomended PETG…
Holder for the Snappy Tools Countersink bits 3/32", 7/64", 1/8" and 9/64" Printed on Prusa MK4 with Jessie PLA Red Ice from Printed Solid I am using the Input Shaper which prints at .20mm layer height. I also did a color change before…
Pretty self explanatory, it's a lid to cover an opened container of Cesar dog food. It snaps into place. No promises it will be spillproof though. Also, it snaps on really nicely but almost too well- it needs some effort to get it back…
Designed by my 9-year-old daughter as a major cuteness upgrade to the admittedly grumpy OctoBot ! The babies, mamas and daddies can go on countless adventures in the hands of creative kids, or happily provide clicky fun for fidgeters of…
Print Settings Printer: FIashForge Dreamer Rafts: No Supports: Yes Resolution: 0.1 - 0.3mm dynamically Infill: 30% Filament: PLA white Category: Household Supplies
Printed with adaptive layer height on MK4 wth .4 nozzle using octave PLA
I made this model to get rid of an old clangy metal shelf in my bedroom. If your printer is calibrated correctly the parts should snap together really tight so no glue should be needed. At the time of uploading I don't have any pictures…
Wanted a snappy box, built a snappy box. Single ball joints. Let it cool down before putting it together.
Stand for the insect catcher from Snapy. Ein Standfuß für den Insektenfänger von Snapy.
Store your Make It Snappy countersink tapered twist drill (Model #: 44300) in a modern gridfinity bin.
3x3x4 Gridfinity bin to hold a set of five Snappy self centering bits (5/64", 7/64", 9/64", 11/64" & 13/64"). Created with the Fusion Gridfinity Generator .
Behold the Snap Switch! It is the most satisfying little fidget toy you can take anywhere with the built-in keychain hole. It comes in 2 easy to put together parts that were made with color swapping in mind :) If you would like to support…
About This Model This is a 3D model of Snappy , the official mascot character of Snapmaker Japan ( @snapmaker_Japan ). Created with permission from the original illustrator of the official character. Print Settings & Tips Layer Height:…
snappy j head mount to sprite extruder
Credits to revarbat for making the Snappy V3 3d printer. This model fixes the open space that was shown in the 3d printable 3d printer to make it more seamless. There are also templates I designed to make upgrades for this printer.
Credits to revarbat for making the Snappy V3 3d printer. This model fixes the open space that was shown in the 3d printable 3d printer to make it more seamless. There are also templates I designed to make upgrades for this printer.
This variant of a Logitech K860 ergonomic keyboard foot comes with a flex. Quite literally. The "legs" are bent outwards by 3° each, giving it a perfect snug snap fit into the keyboard. This fixes the problem I've had with the other…
3x3x4 Gridfinity bin to hold a set of five Snappy self centering bits (5/64", 7/64", 9/64", 11/64" & 13/64"). Created with the Fusion Gridfinity Generator .
I made this model to get rid of an old clangy metal shelf in my bedroom. If your printer is calibrated correctly the parts should snap together really tight so no glue should be needed. At the time of uploading I don't have any pictures…
SnappyX 210 X-Frame V2 for ZMR 250 Arms Thank you for your interest in the SnappyX 210 V2! If you build a copy, please share a photo or leave a comment – your feedback is greatly appreciated! 😊 What's New: SnappyX 210 V2 is now available!…
A lightweight (~100g) nappy bag holder that hangs from the edge of a baby changing table. Designed to hold a nappy sack with tie handles. The design minimises contact between the printed part and the bag - making it more sanitary and…
The Emergency Nappy Change Kit is a tiny, single-use, snap-open pack designed for those moments when you thought you were prepared… and life proves otherwise. This print locks a full quick-change setup inside the part itself by pausing…
Designed this to work with an IKEA Gulliver changing table as somewhere to have nappy bags open without holding them. It also avoids feet in dirty nappies. Come on we have all been there.
