Steel Sheet Alignment Peg Spacers for Prusa XL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Save your XL steel sheets from printing too close with steel sheet alignment spacers.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 60
- Wydruki
- 5
- Wyświetlenia
- 730
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The alignment pegs on my XL printer were nearly flush with the surface of the steel sheet, making it difficult to ensure proper alignment. At times, the edge of the steel sheet would rest slightly on top of a peg, causing the sheet to sit higher than intended. This resulted in the nozzle printing too close to the bed, embedding the print into the sheet, making it impossible to remove or clean properly.
To solve this, I designed and printed spacers to place under the pegs, raising their height for easier and more accurate alignment of the steel sheet.
This is a simple, quick print. I recommend using PETG for durability, as it handles the high bed temperatures well.