Inspire 1 Golf Ball Dropper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A part the attaches to the back of a DJI inspire 1, so you can drop golf balls form the drone
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 336
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This mounts on the back of the DJI inspire 1. Holds standard size golf ball securely. To drop fly over with landing gear on and raise landing gear. Please read the entire description before printing.
Print with high gyroid infill. I recommend something above 50%
Use tree supports so it does not come out bent.
Do not over tighten when placing on the drone
You will need M3 lock nuts X4, 4 washers that fit on M3 bolts X4, and M3 bolts that are at least 55mm long X4. Embed or melt the lock nuts in to the models backing plate.
You will need to print two of each. backing plate and arm
You can fit two on one plate but I would recommend only printing one at a time. to increase quality.