1 / 7
SOVOL / COMGROW Filament dryer Sharpie blender (colorizer) mount — zdjęcie 1
1 / 7

SOVOL / COMGROW Filament dryer Sharpie blender (colorizer) mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It's a mount that makes it possible to attach sharpie filament coloring blender tool to SOVOL dual filament dryer

Ocena
0 / 5
Polubienia
14
Pobrania
39
Wydruki
0
Wyświetlenia
1078
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

I were really enjoyed coloring my prints with Sharpie markers using Color blender design by Devin Enrique!

So I made an mount for my Comgrow filament dryer box (Also released by brand SOVOL) that makes it possible to attach this sharpie blender directly to it. 

The best part is that You don't need to modify your dryer at all - just unscrew the original filament output insert from the dryer a little, slide on the mount, tighten the screw back and You've done! It can sit here all the time and You still can use the silicone plug to cover the hole when not needed.

 

I printed mine with transparent PETG, but PLA or any other non-flexible material should be fine.

Support are needed for a print (see the slicer screenshot). 

Tagi