1 / 4
Single Extruder - Dual Color - Yin and yang — zdjęcie 1
1 / 4

Single Extruder - Dual Color - Yin and yang

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

One piece, printed twice in different colors, which complement each other to form a yin and yang.

Ocena
4,75 / 5
Polubienia
65
Pobrania
291
Wydruki
4
Wyświetlenia
992
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

The model consists of two symmetrical parts. This means printing the part twice in different colors, e.g. black and white, and sticking the prints together.

There are two options for the interconnection, which no longer show any difference after assembly:

  • interconnection a: between head and tail
  • interconnection b: between the eyes

The normal version is designed very tightly so that it holds together firmly. If it is too snug, I have created a relaxed version.

Print instructions

Important: To get a yin and yang, print the same part twice!

  • no support
  • layer height: 0.20mm (at least up to the bridge at 2.40mm)

Bonus

If you print the whole thing mirrored (Y-axis, if you don't rotate the parts beforehand) a second time (so in total 4 parts), you can glue both parts together and get a wraparound Yin and yang (see picture).

Made for the “Single Extruder - Dual Color” flash contest.

Tagi