Single Extruder - Dual Color - Yin and yang
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One piece, printed twice in different colors, which complement each other to form a yin and yang.
- Rating
- 4.75 / 5
- Likes
- 65
- Downloads
- 291
- Makes
- 4
- Views
- 992
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Share Alike
The model consists of two symmetrical parts. This means printing the part twice in different colors, e.g. black and white, and sticking the prints together.
There are two options for the interconnection, which no longer show any difference after assembly:
interconnection a: between head and tailinterconnection b: between the eyes
The normal version is designed very tightly so that it holds together firmly. If it is too snug, I have created a relaxed version.
Print instructions
Important: To get a yin and yang, print the same part twice!
- no support
- layer height: 0.20mm (at least up to the bridge at 2.40mm)
Bonus
If you print the whole thing mirrored (Y-axis, if you don't rotate the parts beforehand) a second time (so in total 4 parts), you can glue both parts together and get a wraparound Yin and yang (see picture).
Made for the “Single Extruder - Dual Color” flash contest.