Window Cable Passthru
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pass thru for cable for your window. Made for my radio coax.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 140
- Wydruki
- 0
- Wyświetlenia
- 677
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Created this because I wanted a better pass thru for my window that didn't involve tape to seal the gap or introduce more connectors and I wanted the cable to be protected from the weight of the window. I also knew that I could be adding or removing more cables in the future so I wanted to make it semi-modular.
The inner track of the Outer Shell is 18cm wide and the blanks/keystone are 3cm wide so you can fit 6 in any order per Outer Shell. You could also take the blank and expand it to fill the gap in. To figure out the size plug the number of cables into this formula Width=18-(# of keystone*30).
There's also a bushing for the cable to make the gap smaller around the cable.
Video explaining it and how to make your own bushing for a cable from the blank model will be linked here once it's released.
PRINTING INSTRUCTIONS:
Outer Shells, Print 2, they will clam shell together.
Cable Keystone, print 2, they will clam shell together.
Cable Bushing, print 2, they sit together inside the bushing
Blank filler, print 1 per slot being filled