1 / 2
Roland V60HD Slant Rack Ears
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Had a need for some slant rack fins/ears and no one makes them for the piece of AV gear I possess.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Had a need for some slant rack fins/ears and no one makes them for the piece of AV gear I possess.
These rack ears/fins will fit a Roland V60HD for mounting to a slant rack for an audio mixer.
My specs for printing ideally will be that of a SOLID piece.
Infill should be set to 100%.
Hexagonal Print Pattern or something comparable in strength.
PETG
Printing on an Ender 3S v1, print time is about 16 hours for one ear/fin.
INFO UPDATE October 10 2024
- After printing this one, I realized that I need to create the alternate side with holes inverted to match. I did create the alternate side in autodesk360. Just need to load it here. However, I still need to configure the rack mounting holes so they line up better on a rack.
- Added photo shows that I printed both sides. But I had to drill out holes to match the opposing side's mount.