Liczymy pasujące modele…
I have Roland V-Drum TD-07KV, frame post diameter is roughly 38.15 mm. So I didn't know other Roland post sizes. So please measure before printing it. Printed with eSun ABS+ without Support. Between 20% and 40% infill is more than enough…
Replacement power button for the Roland Fantom XR rackmount synthesizer module. Made this for a friend who's power button had broken. Guess that's a common failure, so I'm sharing this for anyone else who's got a broken button.
Recently got myself a legendary Roland CR-78 with most fader caps missing. Guess they were just quite loose from the factory. I designed a replacement which fits snugly and looks very close to original. Print in white PLA for original…
No supports required. Material PLA or PET-G
This custom-designed stand securely holds the Roland GO:MIXER while allowing precise 30° incremental rotation for optimal access and cable management. The mount balances strength and efficiency, making it ideal for portable setups or…
Pedal actuator for the Roland HD1 Lite e-kit. So the rubber actuator that it comes with dries out, and you can of course find replacement parts but I am hoping that TPU fares a little better. I tried different densities, 30%, 15%, as I…
I made this model with PLA plastic I made this model in a A1 of Bambu Lab and this model not included supports.
beefed up version of the original. made the walls a bit thicker to increase the clamping force
Print upside down as per the original, adding support for the drumstick holder holes. I printed mine with slight fuzzy (bumpy) skin for some texture.
Attach your drinking bottle without it getting knocked over and spilling on the carpet. Prints as-is with no supports. Default model should fit any NRW/Euro bottle and will attach with zipties to a 40mm diameter vertical post.
Introduction The Roland MIDI half-width devices stack nicely onto each others, but unfortunately slide around too easily, making it precarious to operate or move around. Therefore, I've created this assembly to solve this issue. This…
Holds blades, the blade boxes for most brands, blade mount, and sheet cut blades for Roland printers & plotters, both a version with a small tray for old blades, and one without.
this is an attempt at creating a case for the roland s1 synth. I can be a bit clumsy sometimes and i know that it won't be long until i damage it (and then through the process of 3d printing fix it again) so i created this case or box. is…
Hi guys! I just purchased TD27KV2, and it came with KD10. I couldn’t attach my Iron Cobra pedal properly… So I designed this 3D piece and printed it! It is working perfectly! I thought many of you would have the same issue, so here is the…
I made this case for my Roland SH01a synthesizer. It fits really well and I integrated little hole in which the spring loaded pin on the synthesizer clicks into. Printed without supports upside down. Dimensions, settings and material:…
Simple holder for drumsticks fitting the Roland V-Drums series
Had a need for some slant rack fins/ears and no one makes them for the piece of AV gear I possess. These rack ears/fins will fit a Roland V60HD for mounting to a slant rack for an audio mixer. My specs for printing ideally will be that of…
More stable than the first version Print specification : Printer : Artillery X1 Temp : 215° bed :60° Material : Pla Infill : 20% Support : 20% Speed : 105mm/s 1 bolt M06 x 30 + washer + nut
I have Roland V-Drum TD-07KV, frame post diameter is roughly 38.15 mm. So I didn't know other Roland post sizes. So please measure before printing it. Printed with eSun ABS+ without Support. Between 20% and 40% infill is more than enough…
Because I drop drum sticks a lot, I made this drum stick holder. It holds 24 + 2. I can the freely drop drum sticks as I practice, and pick them up when I'm finished, instead of during a song. Good times. I only printed the 24 + 2 because…
The stand is made out of two files, one is the stand itself, and a tube that is glued to the bottom of the stand, so it can rest ontop of the structure of the drum. It fits perfectly on my TD1-DMK. I haven't tested on other drums, but it…
Print with brims and slightly reduce speed for the first few layers.
This was for a friend and wanted to retain some of the stock parts functionality. He said it works great with the 2 additions listed above. Printed in ASA. 3mf and .step file will be provided if you wish to edit it. Not sure why the step…
I've designed a simple clamp to move Roland Module to different location to make e-drums even more compact. 2x M4 screw + 2x M4 nut is necessary
Hi Folks, This is a simple model of phone / tablet holder for Roland E-Drums. Fits my TD07-KV. 1x M4 Screw is needed to fix two parts
The holder is fixed with 4x screw M4 x 35mm at the side in the same way the previous screws were installed. Category: Music
This is a simple Clamp that allows to mount a 16mm pipe (from cheap pad stand) as a note/smartphone holder requires 2 x M4 nuts and 2 x M4 screw (8mm is fine) PRINT USING TPU/FLEX
Did you ever wish you could just slap a high-pass filter on your neighbor's apartment? Well, now you can (kind of)! Keep your neighbors happy with these custom-designed Roland Noise Eater Eaters! Built thick and wide using durable 30D TPU…
UPDATE:I changed the tall (td-17) mount top to grip on both sides. Because mine eventually broke. Booo! I also made it solid. Infill need not use much more than supports anyway. I printed the update in TPU. Works well so far. Music Tray…
I wasn’t satisfied with the original sheet stand because it was loosely attached, causing my tablet to sway when placed on it. Additionally, having a small phone positioned awkwardly in the middle of such a large attachment felt…
Hi, I have made this simple stand for the Roland TR-6S. As you can see it is not perfect by all means but it gets the job done. and with limited skills, it worked out quite well.. My print details: Black PLA, 0.20mm Quality, 15% Infill.…
Freecad file contains 2 models, original → as close as possible to original as I could measure some of smaller hole sizes might be wrong as they were hard to measure, also the draft angles were ignored, and second model → optimized for…
Table stand for Roland AIRA Compact units. 4 pieces, no glue or screws required.
These components fit into the horizontal tubes of the Ultimate Support or Roland V-Stand. I am using this to attach a K&M tablet holder (the predecessor of the K&M 19744). The V-Stand can still fold up with the blind cap in place (only if…
Printed in 0.15mm layer high with organic support
Hey everyone! It took a while but I finally finished these Roland speaker inspired fume extractor. I wanted to build an extractor that blends into my setup, like a sleeper fume extractor lol. I created the model with the primary goal of…
La placa de control que uso es una STM32 B-G431B-ESC1. Con el consigo un fresado a revoluciones constantes. Cualquier duda no dudéis en consultarme.
Table stand for 2 Roland AIRA Compact units. 5 pieces, no glue or screws required. Material: PLA+ @ 0.28 No supports
Printed Parts Required to Complete Assembly: (1) "mt32_frontmod" (1) "mt32_back" (2) "mt32_buttonmod" (2) "mt32_spacer" (1) "mt32_stand" (Optional) IMPORTANT NOTE! - #1 - These models are intended for resin printing only, FDM or other…
Con esta mejora consigo cortar madera contrachapada a pasadas de 1.5mm con velocidades de avance de 1000mm/min y profundidad de hasta 1.5mm. Todo dependiendo de la dureza del material. A 10.000 rpm constantes. Los engranajes están…
Original keys with shipment are EXPENSIVE, so… you gotta print your own. It's not perfect but fits the keybed and is decently playable. I printed mine with PLA but you might consider other plastics which do not creep under load.
The base was built in methacrylate, the elevator in 3D printing and the sacrificial table to glue the MDF PCBs with double-sided tape.
Model Description Custom chickenhead-style replacement knobs for Roland SP404, designed as a two-part assembly to fit the indented potentiometer area while maintaining the classic aesthetic of vintage guitar amplifiers. Build Instructions…
Stand for the Roland A-49 MIDI controller I used double sided tape for fastening of the stand
This will print a frame that will fit nicely over top of your Roland AIRA Compact device (P-6/S-1/T-8/J-6) while leaving the knobs and buttons exposed for jamming on the go. Hook the ends into a shoulder strap (took mine from an old…
We got a Roland HP-245 piano from a friend but some of the keys didn't work. It's hard to get replacement hammers these days, and they're expensive. Thankfully @Geklatscht created a model for the hammers for the white keys. But what about…
The Roland Boutique line of synthesizers have a nice compact form factor, but they're designed to be mounted into something. Roland offers the DK-01 dock and K-25M keyboard, but if you own more than one or two, then this isn't a clean or…
A simple tool storage/holder for the bicycle handle and the included allen key of the trailer. It can be snapped directly on the aluminium triangle on the right side of the trailer. For additional safety during the ride, a rubber band can…
While the KSC-70 stand for the FP-30 and FP-30X digital pianos comes with some sticky mounting pads for cable management, I wanted something that could be easily removed while not standing out too much. I also wanted to keep the cables…
I couldn't find any roland CYM-10 cymbal lock at a reasonnable price so i decided to design my own version. It works with an m6 nut and a regular m6 screw or drum screw. Best to print with a lot of infill and in PETG for strength.
My Alesis eDrums are predominantly used for Clone Hero, and the kids like to have a jam every now and then. Unfortunately they also like to run around and I was worried about them tripping on my dangling wires and breaking…
This allows you to attach the pianos power adapter to the back of the KSC-70. To Print Printed it in PLA Layer height of 0.3mm
This is a hack for using BIC ballpoints pens on vintage pen plotters. I've tested on a Roland GRX-400, and it works. Note that this model is highly experimental, more experimentation is need. Please adapt it to your needs and to you…
Replacement slider cap / knob for Roland JX-10 / JX-8P synths and PG800 controller. Single material, fill the dot manually w/ paint.
Inspired by https://www.printables.com/model/1042882-pvm-20m2mdu-speaker-mounts but for Roland and Boss MA-12 monitors. Recommend only these models as they are magnetically shielded. There are a number of Boss MA-12 variants so ensure…
Description: This part was designed to replace lost or broken rubber feet on Roland MDS-25 Electronic Drum Rack Systems. It was modeled from scratch using an original piece for dimensional reference. Compare to: MDS-25 Rubber Foot TPU…
A bracket to mount a Behringer Model-D or Toro to the top of the Roland PK5 or PK5A pedals. This is one side bracket, so simply mirror for the other. The screw slots are big enough to clear the screw heads on the top of the pedals, and…
This is a compact flash panel for Roland VS-840EX, to replace the original ZIP drive. Print Settings Printer brand: Alfawise Printer: Alfawise U30 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.4mm Infill: 20% Filament…
I need an adpater to attch a music stand that I brought from Amazon. So I remix it with the hole in 14mm in daimeter.
Replacement power button for the Roland Fantom XR rackmount synthesizer module. Made this for a friend who's power button had broken. Guess that's a common failure, so I'm sharing this for anyone else who's got a broken button.
Recently got myself a legendary Roland CR-78 with most fader caps missing. Guess they were just quite loose from the factory. I designed a replacement which fits snugly and looks very close to original. Print in white PLA for original…
I created this adaptation bar to mount roland pads on electronic drums. To maintain the stability of the structure, a 10 mm aluminum bar must be inserted inside
I got some Roland kit off the marketplace. Not positive the model, but I'm sure the cylinder holder is usually the same size. It worked great until it broke, so maybe use something stronger than PLA or a better infill than I did. Fusion…
Designed to fit 10-inch Server Rack , but can also work with other similar racks with distance between near and far mounting surfaces of 7.25 inches. This model uses the mounting way Roland intended which uses feet screw holes to mount…
These are clip on beat markers for the Roland TR-8S. Simply clip on and position just before the beat for the present time signature. They provide a more visible reference than the gray lines on the TR-8S. They are easily moved if you…
Do you sometimes accidentally hit the cross fader and then wonder why your track doesn't play suddenly? No more if you quickly print this one. :) More will be added soon
Having problems to find where to put your drumsticks when you finally take a rest from your electronic drums? You are not alone, so here is an holder suited for Roland electronic drums where the rack has 39mm pole ends where you can print…
Everything you need to play Unmatched with Roland Deschain, the character from Stephen King's "The Dark Tower" books. Attached are 3MF and STL files for: • Roland Deschain figure • Base compatible with Unmatched humanoid figures • Health…
All of the corners only fit in their respective corner. When manually cleaning you do have to remove the bottom left jig so if there's one you want to leave out, I would do that one. What you'll need is 8mm M4 bolts.
No supports required. Material PLA or PET-G
This custom-designed stand securely holds the Roland GO:MIXER while allowing precise 30° incremental rotation for optimal access and cable management. The mount balances strength and efficiency, making it ideal for portable setups or…
Double Stand for Roland AIRA Compact Units (S-1, T-8, etc.) Platform angles: 25° and 45° Two versions are provided: • with hexagonal groove pattern • plain Assembly requires three rods to hold the sides together. I used solid aluminium…
Pedal actuator for the Roland HD1 Lite e-kit. So the rubber actuator that it comes with dries out, and you can of course find replacement parts but I am hoping that TPU fares a little better. I tried different densities, 30%, 15%, as I…
I made this model with PLA plastic I made this model in a A1 of Bambu Lab and this model not included supports.
beefed up version of the original. made the walls a bit thicker to increase the clamping force
Print upside down as per the original, adding support for the drumstick holder holes. I printed mine with slight fuzzy (bumpy) skin for some texture.
The Dark Tower - Roland 3D printable model. Super easy to print, adjust size to your needs and go!
Attach your drinking bottle without it getting knocked over and spilling on the carpet. Prints as-is with no supports. Default model should fit any NRW/Euro bottle and will attach with zipties to a 40mm diameter vertical post.
I got a Roland Cube Street with only one of the top protective corners. I modeled up a replacement that should do an adequate job of protecting the amp's corners but not look too radically different from the stock ones. The photo shows…
This is a On/Off switch replacement for the Roland KR-55 Keyboard There are three versions: a plain, rectangular knob a switch with a textured top a switch with beveled, rounded edges print it in a fine resolution (e.g. 0.1 mm) for a nice…
Introduction The Roland MIDI half-width devices stack nicely onto each others, but unfortunately slide around too easily, making it precarious to operate or move around. Therefore, I've created this assembly to solve this issue. This…
Holds blades, the blade boxes for most brands, blade mount, and sheet cut blades for Roland printers & plotters, both a version with a small tray for old blades, and one without.
Replacement curtain slider for Peugeot 206 Roland Garros. Hard to find part, so I modeled it myself. I tested and it works but needs improveents, I will upload dwg file when i find it(soon i guess)
3D Model Description – Alesis Drumstick Holder (37 mm Tube) 3D‑printed drumstick holder compatible with Alesis racks, designed to mount securely on a 37 mm tube. This holder can store up to 4 drumsticks, giving you quick and easy access…
I will be posting an adjustable base for this later because of the terrible viewing angles of the screen. This is an exact model of MY Roland. No buttons or dials, but gives you a general basis to work off of. Provided is the .ipt version…
This model allows you to mount a Roland AIRA Compact synth into a Eurorack case. There is only 8mm space at the rear of the synth, so you will need to use compact right-angled connectors there if you want to use the TRS MIDI or USB-C…
Tool to raise and lower the cap station on a Roland XC-540 , I couldn't find a tool anywhere online so i modeled this up, it fits a little loose but it works. May work on other models of printer
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
Holder for Essager 65W 20000mAh powerbank that hangs on the rear top edge of a Roland FP-30X digital piano. No adhesive, no screws. One seamless basket: its back wall extends up over the piano's top rear edge as a hook arm, and a vertical…
This is a replica of the butterfly nut used to secure the cymbal on the Roland TD-11KV electronic drum kit. It is also compatible with many other Roland electronic drum kits that use the same mounting system, making it a convenient…
this was made specifically for the roland vs-300i media take up.
A mount for the Ikea Skadis board that fits the Roland AIRA series if they use JWR's case/cover. You need to print three hooks per mount to make it work. There is a slim version and a full width version. Print two of the mounts. Only…
The stand does not require any additional parts or gluing. It fits and prints well on the Prusa MK3 in 0.30 mm draft mode with “build plate only” supports and 20% infill. It uses a screw holes of MC-707 and has an additional tab for…
![Replacement Knobs [For Roland Drum pad]](https://media.printables.com/media/prints/1076860/images/8146360_b111a73e-8261-4794-936e-fa45c26112d3_f8804bf5-ee50-42f4-9286-17ba06378f69/hand.jpg)
