1 / 3
Ender 3 Neo vinyl cutter holder Roland style for crtouch — zdjęcie 1
1 / 3

Ender 3 Neo vinyl cutter holder Roland style for crtouch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bracket for Roland vinyl cutter holder that uses crtouch mount points with longer screws. Tested only on Ender 3 Neo.

Ocena
0 / 5
Polubienia
11
Pobrania
82
Wydruki
0
Wyświetlenia
707
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Bracket for Roland vinyl cutter holder that uses crtouch mount points with longer screws. Tested only on Ender 3 Neo.

Should be compatible with all neo series but I have no way to confirm that. It is made so that the bottom aligns with crtouch in up position. When you want to use it you simply put knife in to the holder on adequate depth, little below you nozzle. Basically when Z=0 your nozzle is above bed as much as your Z offset. In this position your knife should just touch vinyl. Springs are compensating for bed or material deformation. Meant to stay on your printer non stop. Using soft plastic cutting board on top of my PEI to protect it. No need to adjustments when put another build plate on top since crtouch will detect that and thus Z offset will stay the same. 

Tagi