P
Printableszosman
Ender3S1CRTouchMountStronger
A slightly stronger version of the original, with more space around the bolts and more material holding the CR touch in place
- Pobrania
- 104
- Polubienia
- 8
- Ocena
- 4,5
Wyniki wyszukiwania: crtouch
70 modeli
P
PrintablesKrekos
CRtouch mount Phaetus Rapido Prusa i3 MK3S+
CRTouch mount inspired by mount from @JonasBurkhard. Short variant is for precision positionig of probe with washers. Long variant can be used as it is. I also include modified Fan duct. Original duct and mount can be found here:…
- Pobrania
- 26
- Polubienia
- 5
- Ocena
- 0
P
Printables
Tapa superior para CRTouch | Ender 3 V2
El cobertor está diseñado para: Tapar el espacio superior que tiene el CRTouch. Ocultar el excedente de los tornillos. Mantener el conector del CRTouch estable. La instalación se hace pasando los cables del CRtouch por el espacio de forma…
P
Printables
crtouch microswiss directdrive mount
After almost one year of manual (and painful...) bed levelling I've finally got a crtouch for my ender5pro, but I had this printer upgraded to the microswiss direct drive (shortly after buying it), so I needed a mount which could fit my…
P
Printables
BIQU/ BTT MicroProbe to CRTouch Adapter
Simple adapter to mount a BIQU / BTT Microprobe to your existing CRTouch bracket.
P
Printables
Ender 3 (Pro/V2) CRTouch/BLTouch spacer
After I changed nozzles to a slightly longer nozzle, the nozzle would crash into the bed when homing/probing. I designed this spacer to offset the probe slightly to compensate for the extra nozzle length. The spacer is 2mm thick which…
P
Printables
BantaMount Module BLTouch/CRTouch
Infill: 15% Material: PLA/ABS Supports: No need Nozzle: 0.4mm Print time: 44m
P
Printables
Ender 3 Stealthburner CRTouch
This is a remix of this model: https://www.printables.com/model/139183-ender-3-v2-voron-stealthburner-conversion Important: You have to flip the bottom bolt of you original Ender 3 Carriage, so that your screw head is on the printhead…
P
Printables
Ender 3 Spring Delete TPU for BLTouch or CRTouch
Printed in TPU so your settings for TPU will work I have made these with a 40% infill, 2-layer top and bottom with 4 walls but i don't see any other settings not working depending on your preference i have use 4 M5 nuts with spring…
P
Printables
Ender 3 Dragon Burner mount (CRTouch)
This plate will let you put a Dragon Burner tool head onto an Ender 3 X carriage (or any printer with the same plate [probably™]). Printing: Something with a higher temp resistance than PLA should be used considering how close it is to…
P
Printables
Ender 3 Linear X Rail CRTouch Mount
This is a block I printed in PETG to go between the Sprite Extruder Pro and the Creality Linear X Rail on the Ender 3. This shifts the nozzle forward a bit, and I had to account for this w/ how my bed was mounted and where my endstops…
P
Printables
Mellow Fly ADXL345 Accelerometer X-axis Mount for Ender 3 with CRTouch Bracket
It printed just fine with PLA on my Ender 3. No supports were needed if positioned lying on the side. The layer height was standard 0.2 mm.
P
Printables
CRTouch Mutant Mobile Mount
The CR Touch has its cable connector on the top unlike the BL Touch which has it on the side. The original part from mediaman was remixed to allow for the change. This allows the CR Touch to be used on a Mutant mobile mounting plate with…
P
Printables
Longer LK5 (others) Dual 40mm CRTouch Cooling
Found a CRTouch for cheap and needed a mount for my Longer LK5 Pro and while I found a design out there the mount was placed incorrectly so I designed my own using the model listed as a source as my starting point. I printed the original…
P
Printables
CRTouch Extended arm With Raspberry Pi Zero Case
This is an extended arm for this camera mount with a case spot for a raspberry pi zero. Category: 3D Printer Accessories
P
Printables
M4 Right panel crtouch mount
Right panel Crtouch mount for the KP3S — Modular 4010/5015 Fan Shrouds with BLTouch Mount — Kingroon. Print in ABS recommended.
P
Printables
CR-200B CRTouch Mount Left with Cable protect
CRTouch or BLTouch mount for CR200B. Its a Remix of the Realy good model from Bastelgarage (Danke). I Remixed it for Cablemanagement. I Printet it with ASA and put some inserts in.
P
Printables
Satsana 4010 - 5015 + CRTouch for Dragonfly hotend
Printed in 0.2mm infill 25% PLA from Wanhao with a Ender 3 V2
P
Printables
Ender 3 V2 BLTouch/CRTouch Mount for FrankEnstein V2 Toolhead UHF Hotends
Remixed BLTouch/CRTouch mount to accommodate UHF-like hotends for the FrankEnstein V2 Toolhead. Lowered mount by 17mm. Used in conjunction with these ducts designed by wight554 and FrankEnstein V2 Dragon hotend mount for my Dragon UHF.…
P
Printables
K2 Satsana Dual Stock Blower Fan Duct Shroud - Ender 3v2 with CRTouch
K2 Satsana Dual Fan Duct for the Ender 3 v2 with CRTouch/BLTouch. It utilizes the STOCK FANS, and a mount/duct for a second 4010 parts blower fan. After a few months of off and on development and design testing, I feel this is ready for…
P
Printables
Tapa superior para CRTouch | Ender 3 V2
El cobertor está diseñado para: Tapar el espacio superior que tiene el CRTouch. Ocultar el excedente de los tornillos. Mantener el conector del CRTouch estable. La instalación se hace pasando los cables del CRtouch por el espacio de forma…
P
Printables
Revo Micro Ender 3 Mount with CRTouch
Remixed E3D mount with a CRTouch mount by Dbarbs . Aligned the mounting holes and added tapers/reinforcements to allow for printing without support. Follows all the same instructions as the E3D mount just with the option to include a…
P
Printables
CRTouch Mount
bltouch mount modified from this model: https://cults3d.com/es/modelo-3d/herramientas/5015-artillery-sidewinder-x1-dragon-mosquito-volcano-combo-duct only needed to make room for the cables and connector for crtouch, the distance between…
P
Printables
Sprite extruder PTFE adapter = zero Y offset BLTouch/CRTouch
M3 heat inserts will be needed for the CRTouch/BLTouch mount. I reccommend printing with PETG, but if you use PLA increase the wall to 3 or 4. Supports will be required, use tree slim and tree auto. If you try anything else, let me know…
P
Printables
Satsana for Ender 3 Creality direct drive and CRtouch
This is a remix of another excellent remix, just to add the CR touch to the build. This version is only for Ender 3 / Pro, not V2. Update January 31: tried to install it on my printer but i found that the heated block is a little bit…
P
Printables
Improved CRTouch mount for Ender 3 S1 Pro (Sprite Extruder)
The Ender 3 S1 Pro comes with a sprite extruder, which is overall not a bad piece of kit. However, the probe is mounted quite far away from the nozzle on the Y axis. This makes it impossible for the bed mesh to correctly account for any…
P
Printables
Ender 3 Max Duct 0Yoffset CrTouch mount.
allows for really good part cooling aswell as accurate and repeatable probing due to the 0 YOffset. default plate MGN12H
P
Printables
Right panel with CRtouch mount (M4)
Quick remix to give clearance for CRtouch cable. Big thanks to Troche Hole for the great design!
P
Printables
CrealitySonicPad G-Sensor Mounter/Bracket for Ender3 S1 or SpriteExtruder with RightSide CRTouch
Creality Sonic Pad G-Sensor for CR Touch or BLTouch Mount for Ender 3S1 or Upgraded SpriteExtuder upgraded Ender3v2. Y-axis zero offset. Prove offset: x_offset: 40 y_offset: 0 Links: JST 1.25mm both female 5pin cable:…
P
Printables
Satsana CRTouch Ender 3 Pro Mount
Mount for a CR Touch on the Satsana hotend fanduct. Remixed because my nozzle was crashing into the bed. Lowered the CR Touch by 2.5mm compared to the original mount.
P
Printables
Sermoon D1 Sonic Pad accelerometer mount with CRTouch
Allows you to not have to take the CR Touch off to take resonance measurements for Sermoon D1 with Sonic Pad for Klipper. This is a remix of the below two designs. sermoon d1 adxl 345 mount by PA3MA - Thingiverse Sermoon D1 CR-Touch mount…
P
Printables
ADXL345 BLTouch(CRTouch) Mount
I tried other mounts and they just didn't fit with my CRTouch so I made this. Works well for me. This has spacers for the CRTouch wire so it will work with either the BL or CRTouch.
P
Printables
BlTouch / CrTouch Nozzle Offset Finder
This is a design to help you figure out the correct probe offsets for your specific BLTouch / CRTouch mounts. The lines on the design should be 5mm apart, but it doesn't really matter because it's mostly just to be able to make sure you…
P
Printables
SHERPA MINI EXTRUDER MOUNT FOR ENDER 3 WITH CRTOUCH
This is a lightweight Sherpa Mini extruder mount/holder/bracket for Ender 3. Compatible with Creality CrTouch. It is small and light. This is my own desing and I printed it from ASA filament. You may use any filament that resist high…
P
Printables
BIQU H2 Voxelab Aquila mounting plate for CRTouch
This is just a simple remix of the mounting plate by a_shj. I don't have a BLTouch and instead have a CRTouch. I remixed the model to accomadate the top plug of a CRTouch.
P
Printables
BLtouch/CRTouch short bracket
This model should fit with hotends shorter than the Ender 7 standard hotend. Printed at 250/82, 100mm/s, no support
P
Printables
CRTouch_Case
Broken CRTouch case due to dive? Print a new one :D NO SUPPORT NEEDED! Material: PLA /0.4mm nozzle
P
Printables
BLTouch and CRTouch for Front 4010 Fan Adjustable Mount
This is an old design I made and still use on my ender 3 but it should be usable on any printer with a front mounted 4010 hot end cooling fan. It is adjustable by simply sliding it down and tightening the bolts. You can see it in my…
P
Printables
Satsana Dragonfly BMS 5015 CrTouch
Remix of satsana to fit dragonfly bms hotend with 5015 cooling fan Fitted for ender 3 pro only as thats what i have….will fit any printer that uses the same x carriage as ender 3 pro probe offsets are: x-53 y-15
P
Printables
Ender 3 Direct Drive - BMG + E3D V6 + CRTouch
Remixed the holder to work with a Creality CRTouch insted of a BLTouch. The connector is in a different place and was blocked by the original support. You can use the M3*6mm screws that come with the CRTouch and screw them directly into…
P
Printables
Magnetic mount for ADXL345 on a CRTouch
This is a magnetic mount that sits atop a CRTouch/BLTouch and compliments the ADXL345 mount made by motocoder at https://www.printables.com/model/165292. I used 5mmx3mm magnets and the through-holes are just big enough for a M3x8mm screw…
P
Printables
Mini Stealthburner Switchwire mount (CRtouch)
**UPDATES** 6/29/2023 I fixed the path that the m3 square nut/ hex nut slides into to mount the Mini-SB to the mount I had created a custom mount for the Mini-Stealthburner toolhead for my heavily modded Ender 3 v2. When I decided to…
P
Printables
Mini Stealthburner Orbiter Switchwire mount (CRtouch)
I created a mount for the Mini-Stealthburner fan shroud and orbiter 2.0 extruder. I intended for this to be for my heavily modded Ender 3 v2. I decided to convert my Ender 3 v2 to a Voron Switchwire Style Core XZ printer. It also features…
P
Printables
Low-profile X-axis limit switch mount for Creality CR10 Smart Pro by MAXPROBE for Zero Y 0 Y crtouch probe offset mount
Low-profile X-axis limit switch mount You will need this to fit zero Y offset CR touch probe mounts like the MAXPROBE backplate on your Creality CR10 Smart Pro Features Low profile Uses original components and fasteners Fully reversible…
P
Printables
Ender 5 S1 CRTouch Zero Y offset mod
Moves the CRTouch location to 0X, 44Y offset. Fixes variance slop due to the carriage shifting during a print. I found the reference model improved the original but still had to much flex that was affecting the auto bed leveling results.…
P
Printables
Ender 3 Neo Hotend+backplate+crtouch (STEP)
Starter kit for modeling your own Ender 3 Neo shroud. (took a lot to find.) Big thanks to everyone who supplied the files for this. (NOTES) You must orient this to your personal measurements. This is not oriented dimensionally together…
P
Printables
Ender 2 Pro CRTouch Mount
Just bought the Ender 2 Pro and Creality CR-Touch. No Mount that i can use with this printer in the Box. So, the solution: I found one here, plus my thought with the inserts in the two holes forwards (M3/6) and with Tinkercad I made…
P
Printables
Hemera Mount Plate for Ender 3 with CRTouch
Changes from Aaen's model: Notch for CRTouch plug Bottom roller nut now allows for wheel tension adjustment enlarged all the holes by 0.2mm for better tolerances Prints just peachy in ASA.
P
Printables
CRTouch Mount Adapter for Vyper
This is an adaptor for the Anycubic Vyper to be able to support the general CRTouch Mount delivered by Creality. I've printed the part using a 0.4 mm Nozzle and with a 0.2 mm layer height. To assemble it I used some longer M3 screws to…
P
Printables
OctoCam Camera mount for Ender 3 with CRTouch (Works w. MicroSwiss NG)
This is a mount for a wide angle Arducam to be used with OctoCam. OV5647 5MP 175 Degree Wide Angle Fisheye Lens on your Ender3v2 Available here: IOV5647 Camera Module for Raspberry Pi 3B 4B 3B+ Adjustable Focus 120 130 200 160 Degree…
P
Printables
CRTouch Mount EVA 3
My 3D touch died and I still had a CRTouch lying aroung but the printer I needed it for has a EVA3 printhead with does for the CRTouch. So I made one.
P
Printables
Webcam Tripod Mount for Ender 3 Pro /w CRTouch
A quick and dirty remix of Jonathan Gahn's remix, now compatible with CRTouch Probes.
P
Printables
Creality Sprite Extruder Zero Y Offset BLTouch/CRTouch Mount
Should work for both a BLTouch and CRTouch since the mounting holes are the same. Print oriented with the extruder-side mounting surface on the build plate. Supports are optional depending on how well-adjusted your printer is. I printed…
P
Printables
SATSANA Ender 3 Remix for Micro - Swiss Direct Drive + BLtouch or CRtouch - with more accessible mounting screws
I printed and used the original, and all was well, until I needed to take this shroud off several times for working on the hotend. Over time the screw head got stripped out on the screw that's covered up down inside the shroud, and the…
P
Printables
Fix ABL issues with MAXPROBE backplate - Fixes auto bed levelling issues for Sprite Extruder with CR Touch on Creality printers CR10 Smart Pro Ender 3 S1 - Zero Y 0 Y crtouch probe offset mount
Sick of auto bed leveling issues? The MAXPROBE backplate fixes them for good. Your printer should have come from Creality like this. Features Easy to install - takes just 10 minutes, no cutting wires or soldering needed Uses all original…
P
Printables
Sovol SV06 Plus CRTouch Mount - Adjustable
Just took the great design by DevCyclops and made it adjustable to use it with generic Volcano Nozzles and the Stock K1 Style Nozzles. Does not work with Vortex Duct since it is to wide and will collide with the the CRTouch. BLTouch…
P
Printables
Ender 6 CRTouch Mount
Print in PETG, ABS, or better Tree supports in spot shown if you want, or just bridge it and have it be a little messy. Recommend 4-5 perimeters for stiffness. Need 2 M3 screws to mount sensor and 2 M3 screws to mount bracket to…
P
Printables
Bastion CRTouch Mount
It works just like the stock BLTouch mount. This remix has a cutout for the wires to run through.
P
Printables
Ender 3 Neo vinyl cutter holder Roland style for crtouch
Bracket for Roland vinyl cutter holder that uses crtouch mount points with longer screws. Tested only on Ender 3 Neo. Should be compatible with all neo series but I have no way to confirm that. It is made so that the bottom aligns with…
P
Printables
SV06 and SV06+ CRtouch mount with less offset
This mount tucks the probe as close to the nozzle as possible. SV06 style and SV06+ w/Volcano nozzle options. Below are my settings in Printer.cfg [bltouch] sensor_pin: ^PB1 control_pin: PB0 x_offset: 24.0 y_offset: -25.9 pin_move_time:…
P
Printables
Rock Solid BMG+CHC Pro+CRTouch/BLTouch Hotend Mount Ender 3/V2/Neo Aftermarket Direct Mount Plate
So my problem was that BMG clones didn't grip the heatsink hard enough and the whole thing sways side to side with the slightest touch to blobs or overextrusions and I wanted to stop that, so I designed this to be super rigid and it has…
P
Printables
Remix Ender 3 | Dual 5015 Fan Duct with CRtouch mount
Original model is Ender 3 | Dual 5015 Fan Duct by Simon_Szi_ I modified below. 1, I added a mount for CR touch. (close enough to the genuine CR touch mount location) 2, Enlarged mounting holes so that we can adjust the fan height up or…
P
Printables
Ender3 v3 SE/KE dual 4010 blower shroud for K1 hotend (blank/crtouch/eddy)
It's simple and looks not that bad. Print this in PETG/ASA/ABS Supports are required. Layer height 0.2mm Cooling is not the problem. Feel free to remix this or ask for modifications. PS: I will add photos when I get home. I was running…
P
Printables
Creality Ender 3 CRTouch Pinda mount
A simple mount for Pinda (or other) induction probes utilizing stock CRTouch holes on the Ender 3 Y-axis gantry. Parts needed: 3 x m3*8 (or longer, up to cca m3*12) hex screws 1 x m3 hex nut You then may wire the probe into the dedicated…
P
Printables
Bondtech DDX + Mosquito Creality CRtouch mount
If you upgraded your Creality printer with Bondtech DDX + Mosquito hotend and you have a CRTouch, then this should be a suitable mount. Make sure to calibrate probe offsets, but with my Ender5 Pro, offsets are: x_offset: -29 y_offset: -4…
P
Printables
Ender 3 Crtouch satsana cooling
Użyj metalowego drewna crtouch, które znajdują się w zestawie z interfejsem.