Ender 3 Stealthburner CRTouch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed to allow the CRTouch to fit, and to make the cable cover close fully. Also made the CW2 Extruder fit.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 747
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a remix of this model:
https://www.printables.com/model/139183-ender-3-v2-voron-stealthburner-conversion
Important: You have to flip the bottom bolt of you original Ender 3 Carriage, so that your screw head is on the printhead side, and the nut is on the opposing side, otherwise you WILL damage your Probe. Ask me how I know.
Hardware needed:
- 8x Heatset insert Voron Spec
- 2x M3x20 DIN912 CRTouch Mounting
- 5x M3x10 DIN912
- 2x M3x16 DIN912
Print using Voron Settings:
0.2 layers, 4 perimeters, 5 top/bottom layers
Depending on your choice of hotend you might need to change the height of the spacer, the 20mm one worked as intended, for a Bambu Hotend. You can change the height of the spacer with a non-uniform scale in your slicer, or edit in CAD.
I added F3D and Step files, if you need anything else just contact me.
Important: You have to flip the bottom bolt of you original Ender 3 Carriage, so that your screw head is on the printhead side, and the nut is on the opposing side, otherwise you WILL damage your Probe. Ask me how I know.
The CRTouch Model in my CAD files is from here:
https://grabcad.com/library/cr-touch-dummy-1
Stealthburner by Vorondesign:
https://github.com/VoronDesign/Voron-Stealthburner/tree/main/CAD