Liczymy pasujące modele…
I wanted to run a few Bento Minis in my Enderwire project. I used the front panel brackets from the DaRk_dOg / boubounokefalos Enderwire . I am not sure if it works with the official Switchwire. This connects using the M5 and M3 front…
couldn't get tinkerman's mount to do what i needed without drastic modification, but was inspired
Front and back grills, and endcap have been modified, so it now allows inserting 6x3mm disc magnets. Thanks to use of magnets, you no longer need screws to mount endcaps, which improves look of the printer. Endcaps are also easy to…
Compatible with enclosure as it acts as both camera holder and panel holder. To mount it, I used an M5X20 screw with an attached nut to make it like an M5X18.
NOTE: I have not had a chance to try this yet. My TFT35 is currently on the way to me. If you print this before I have a chance, please leave a make with a comment telling me how well it works! Mount for a TFT35 SPI touchscreen for…
I double-sided taped it to the top panel and used the wire organizer to run USB cord. Mount Uses one M3x30mm bolt with M3 Nut
I promised to cad this up ages ago and as soon as I actually started rebuilding my enderwire I actually did it. Inspired by RockAndRoll for the 2.4, you can tip an open or enclosed Enderwire on its side and and it will be stable. Yes my…
couldn't get tinkerman's mount to do what i needed without drastic modification, but was inspired
Update 24/02/26: Corrected an issue with the bearing retainer threading and file names. This is a remix of nhchiu 's fantastic Switchwire Double Shear Motor Mounts redesigned to work with the Enderwire conversion. Other than the supplied…
This Mod moves the location of M3 screws further inside the XZ Block so that the Screw can be screwed directly to the profile without going through the Linear Rail.
Front and back grills, and endcap have been modified, so it now allows inserting 6x3mm disc magnets. Thanks to use of magnets, you no longer need screws to mount endcaps, which improves look of the printer. Endcaps are also easy to…
Seffyr adapted the Switchwire Double Shear Motor Mount for the Enderwire conversion, but originally only for the X and Z motor mounts. To make it work for the Y axis, I needed a more compact housing that sits slightly closer to the belt.…
This is a PUG mount for a big boy Switchwire with the standard 3-hole drag chain on the Z axis. I made it because I couldn't find a working PUG mount for my LDO Switchy. It might work on an Enderwire. You'll have to test it to be sure. If…
This is a set of feet and handles designed to allow you to easily lift an enclosed switchwire. You can also safely roll your switchwire on its side for electronics bay access. The handles were designed to fit the siboor ender to…
Adds a hole for an m3 heatset insert, in line with the 2020 extrusion, in order to add a panel clip. That adds stability, more than just VHB tape.
BTT Manta M5P mount for Enderwire. (5) M5 x 10 screws w/ (5) M5 Spring nuts needed to mount to frame, (4) M3 heat inserts m3x4x5, and (4) M3 x 8mm hex screws.
The Enderwire non-pro 's Y axis is quite wobbly due to the single MGN12h rail in the middle of the whole assembly. I searched for a solution to use two MGN12h rails while still using most of the original conversion files, so i came up…
Although there are many models of Nozzle Wiper for the Ender 3, I've not been able to find one that fitted my Enderwire Conversion. My model uses the Silicone Brushes from the Bambu Lab A1 as I'm not a fan of Brass Brushes. There's a…
INTRODUCTION Since the Raspberry Pi seems to be the go to compute module its only natural for us to support the Raspberry Pi Camera module. This is a 4 piece mount that attaches to the right front panel bracket that attaches the side…
This combines the top door latch with a C270 Mount Uses one M3 M3x30mm bolt with M3 Nut
This is a mount for the M4P in the Switchwire. It's REALLY tight. You need 90º USB adapters to use the USB ports on the M4P, but this blocks the Ethernet port. Installation: I also added a mount for an 8010 fan to cool the steppers, this…
Compatible with enclosure as it acts as both camera holder and panel holder. To mount it, I used an M5X20 screw with an attached nut to make it like an M5X18.
I redid the model to add space to 5mm and suit the original enderwire model j'ai refait le model pour ajouter de l'espace a 5mm et convenir au model original enderwire
This is for the right side only, mirror it on your slicer to have the left side.
Cartographer mount for Enderwire with Dragon Burner. The mount can be used with standard edition, but you will have to use the belt clamps with cut as otherwise, the socket won't fit. Thanks to @PiotrChaos, it seems the mount can also be…
The mount fits into the right z_bearing block, but you will need longer M5 screws (+1cm). It allows to use all PUG models. You will need to print the modified part with supports. Otherwise print with Voron settings.
NOTE: I have not had a chance to try this yet. My TFT35 is currently on the way to me. If you print this before I have a chance, please leave a make with a comment telling me how well it works! Mount for a TFT35 SPI touchscreen for…
Modified front grills for either boubounokefalos (DaRk_dOg) or EzrielDreamurr Ender Switchwire conversions. This allows the use of a 60mm fan on the front, just like the 60mm fan used in the rear grill by default. These can be used on…
I double-sided taped it to the top panel and used the wire organizer to run USB cord. Mount Uses one M3x30mm bolt with M3 Nut
For materials, instructions, and for the other final printed part, visit @LivingroomWorkbench's original model: https://www.printables.com/model/560244-ender-switchwire-bed-cable-extension
Brenden D'Paula made an excellent mod to use the Bambu A1 silicone brush. I was looking to make one from scratch but decided to remix his instead as it was designed very elegantly. I remodeled it slightly so that it will work with the…
Had a couple Disco on a Stick LEDs laying around from a previous Voron 2.4 300mm build and found that it would fit perfectly in an Enderwire. This mount is designed specifically for Fizzystech's enderwire enclosure with holes that align…
Its the same as Ken226's model only difference is it can fit the Y-Idler part of Enderwire using a press fit m3 nut and a short m3 screw. I wanted to use his model and this helped me thought maybe I would upload in case anyone else needed…
Printer: Voron Trident 300 Filament: ASA C-tech Premium-line BLACK Printer settings: Hotend temperature: 255 °C Bed temperature: 110 °C Layer height: 0.2mm Infill: 40% honeycomb Supports: No Brim: No Other settings are the same as on…
The summary pretty much says it all. I wanted to incorporate my Knomi into my Enderwire seamlessly and could not find a skirt using the v1 hardware. Unfortunately I think I killed the screen on my device before I installed it in the…
Purchased the Fysetc DSI display as it was much cheaper than the BTT one but found that it's a much slimmer display with the ribbon cable in the middle instead. Remixed to make it work for the Fysetc 5" DSI display. Update : Added a…
Decided to try and get the Enderwire to print as fast or faster than the Bambu bedslingers. This is my take on the 9mm belt mod for the enderwire which uses a double shear motor mount to support much higher belt tensions, toothed idler…
Enderwire Bed Model to use with any Slicer. It's meant to be used with 220x220 bed size. Extracted directly from https://github.com/boubounokefalos/Ender_SW Fusion model
Reverse engineered and recreated version of Ender 3 / Pro LCD display enclosure for Voron Switchwire and Enderwire printers. I contacted the author of the original design from here:…
I found that the gantry would always tilt in one direction or another if there was a minor crash or if I moved the gantry by hand with a tad bit too much force on one side. I found that the main cause was because of the flat faced bearing…
This is a Nevermore Micro V6 mount for Fizzytech's variation of the Enderwire. Should work with standard Enderwire builds, the only difference is that the FT Enderwire has holes for the enclosure panels (Fizzytech's enderwire doesn't use…
🚀 Quick Spotlight: EnderWire Beefier Square Nut Y Idler If you're building or upgrading a Voron-style EnderWire/SwitchWire printer, here’s a golden opportunity to beef up your Y-axis. Enjoyed the model? Help me save up for another Voron…
BigTreeTech HDMI5 1.2 mount for the Switchwire or Enderwire.
I promised to cad this up ages ago and as soon as I actually started rebuilding my enderwire I actually did it. Inspired by RockAndRoll for the 2.4, you can tip an open or enclosed Enderwire on its side and and it will be stable. Yes my…
The original creator made some awesome revisions to allow for a much more rigid means of mounting the gantry bearing blocks onto V Slot extrusions. I run an umbilical setup on my enderwire, meaning I do not need the cable chain mount on…
A spool holder alternative for the Enderwire which reuses the stock Ender spool holder tube. I designed this variant because I have a roller bearing spool holder and wanted to reuse it on my Enderwire, but it will work with the…
Update 24/02/26: Corrected an issue with the bearing retainer threading and file names. This is a remix of nhchiu 's fantastic Switchwire Double Shear Motor Mounts redesigned to work with the Enderwire conversion. Other than the supplied…
Building an Enderwire, I have found out that the screen cover wasn't quite suitable for the MKS mini12864 v3 I own. It has different PCB dimensions, a beeper on the back and slightly different components layout versus the BTT (?)…
I am building an Enderwire and I have an OrangePI Zero3 on hand. Couldn't find a mount for it and had to design one myself. Inspired by the original project and built from scratch.
This is v1 all I did was make an opening to run the wire, and mount to the front most mounting holes on the rear of the enderwire.
Description in WIP! Servo Model: GuoHua A0090 Umbilical Mod for Stealthburner (using this you will not lose Z height): https://github.com/kejar31/VoronMods/tree/main/CB-C2
This Mod moves the location of M3 screws further inside the XZ Block so that the Screw can be screwed directly to the profile without going through the Linear Rail.
a mount for the hdmi 5 by btt for the switchwire/enderwire
I took the original PG7 - 2 file and created a version for two hole cable chain and had the PG7 thread be at a 45 degree angle so the umbilical would not hit the top of the enclosure when printing the full print height.
2 hole version for siboor cable chain Printed in Abs standard Voron Settings
-use m3x6 or m3x8 screw and t-nuts -its for 25mm gap
use M4x50 screws. clearence for screws are 4.10mm. i make it snug so upper piece holds the screw even on removed.
I modified the model to work with the Voron Enderwire - Full 2020 extrusion frame
Thought cable chain was useless so just replaced it with strain reliefs
Adapter plate to fit an ApolloLander/ApolloMini to Enderwire and Switchwire (and other voron mount) You can get the Apollo on my Patreon (here) nozzle height is the same as stealthburner, so you can use a probe in the rear block, like an…
Seffyr adapted the Switchwire Double Shear Motor Mount for the Enderwire conversion, but originally only for the X and Z motor mounts. To make it work for the Y axis, I needed a more compact housing that sits slightly closer to the belt.…
Tired of adjusting belt tension by moving the motor? This solves it. This is a simple and compact belt tensioner designed for Voron Switchwire and Enderwire (XZ axes) . No need to loosen motor screws during adjustment The mechanism works…
This is a PUG mount for a big boy Switchwire with the standard 3-hole drag chain on the Z axis. I made it because I couldn't find a working PUG mount for my LDO Switchy. It might work on an Enderwire. You'll have to test it to be sure. If…
This is a set of feet and handles designed to allow you to easily lift an enclosed switchwire. You can also safely roll your switchwire on its side for electronics bay access. The handles were designed to fit the siboor ender to…
Adds a hole for an m3 heatset insert, in line with the 2020 extrusion, in order to add a panel clip. That adds stability, more than just VHB tape.
I use it with https://github.com/boubounokefalos/Ender_SW Also should work with https://github.com/fizzystech/ft_enderwire
Modified for an Enderwire conversion. I had to shorten the mount by 2mm and add a notch for the Cartographer's USB/CAN connector. Modifications were required to fit the A4T toolhead.
I modified a lot of parts to fit my need like installing mgn9h railings and 623 bearings for my enderwire project. For the base i used voxelab aquila frame. Its the same as ender 3 v2 frame . Ender 3 pro have 2040 y axis frame. You need…
Small buck converter mount meant for the Voron switchwire/enderwire
NOTE! You may need to scale the model up about 1-2%, I designed it with very tight tolerances. New v2 Version! Now includes a larger cut face, and a hole where you can put an m5 bolt thru along with a t-nut to clamp the guide onto the…
This mod for the enderwire by Ultrawaffles. It adds a second stepper motor to the Y axis to increase acceleration and speed. This mod requires a motherboard with a free stepper driver. Hardware: 3x M5x8 3x 2020 M5 Tnut 4x M3x25 1x Nema 17…
Front grill mount for the Ender 3 switchwire mod by DaRk_dOg, adding HartK tft mount
Front grill mount for the Ender 3 switchwire mod by DaRk_dOg, adding HartK tft mount
I wanted to print the Raspberry Pi holder from here , but my Raspberry Pi's heatsink case uses M2.5 bolts instead of M2, and I had some M4 T nuts laying around instead of M5. I edited this in Fusion 360 using the original Ender_SW CAD files
Enderwire Stock Power Inlet modded to fit the parts of my Ender 3 v2. For Power Inlet Huaconn HC-99-F1 and Rocker Switch Huaconn HS9-C2 from stock Ender 3 v2
I didn't like the square model of the printable TPU Foot for Switchwire, so I made a round one. Print with TPU and 10 to 20% infill (depending on how hard your TPU is).
Darkdog supplied an stl to mount the nevermore v4 at the front of an ender 3 switchwire conversion, I have mixed this with the original front panel mount to create these mounts, left or right or both. I have revised the mounts with…
I needed USB and LAN on the back of the printer, so I remixed the middle rear skirt for keystone inserts
I didn't want to buy an original Keybak because it's expensive to get in EU. Planning to switch to motor brake PCB anyway. This fits cheap door pullers from aliexpress. I bought this one:…
Makes the tensioner work with the thomasfjen v1 ender 3 to switchwire conversion.
This addresses the issue brought up in the DaRk_dOg's Ender SW repo: https://github.com/boubounokefalos/Ender_SW/issues/39 The cutouts were taken from the original Ender 3 bracket. I made sure the original design aesthetics remained…
Original Y endstop by @DaRK_dOg still has its uses pending the brand of electronic endstop switch you use.
This is a modified version of the 60mm fan mount that Steve supplied for the v1 enderwire conversion, I have adapted to to suit the v2 conversion.
BTT Pi Mount for 2020 Extrusions / Enderwire as it has a slightly different hole pattern than the Raspberry Pi. It is also moved away from the extrusion to allow room for 90 degree connectors.
This is a remix of the alternative keybak for Voron Switchwire or Ender 3 to Switchwire conversion. With this mod you can use the Voron standard heat inserts (M3x5x4) Cheap door puller as keybak: → https://www.aliexpress.com/item/100500…
It's not perfect, but will get the job done. You can also find this model in OnShape for making any adjustments you may think it needs.
I remixed the SKR Mini E3 V3 mount that comes with the boubounokefalos conversion to fit a Manta E3 EZ board
you need 2x M5x10 Button Head Screw 2x M5 T-nut 4x M2x10 Self tapping screws you can use old salvaged screws for self tapping.
I Printed it in PETG and fits great! Uses 4-M3x6 to mount buck converter to board, and 2-M3x8 with T-Slot Nuts to mount into extrusion.
An X carriage adapter for the Sprite Pro Extruder that allows the use of a linear rail and the belt driven Core XZ motion system of the Voron Switchwire. I printed with ABS+ using Voron's recommended settings found in the beginning of all…
Enderwire bottom extrusion mod which allows the use of 460mm 4040 extrusions which replace the 290mm extrusions on the ender 3 pro and eliminate the need to print the side extensions. also the feet are placed at the front.
This is a cable channel for the Enderwire conversion. It's mounted with M3x8 screws to the frame. You can use the zip tie points to hold some cables down. Feel free to break off some of the studs in the center if they are in your way :)…
This allows the use of the EVA cable mount for your umbilical cable strain on the Stealthburner.
This mount allows you to mount a 15mm(OD)x10mm(ID) cable grommet to a 4020/4040 extrusion. I used it together with my umbilical cable mount for the Voron Stealthburner…
I wanted to have 2x 6020 fans for the underside so I created these remixes from the Ender Switchwire github.
