FT Enderwire Daylight / Disco on a Stick Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Daylight / Disco on a Stick mount for the FT Enderwire. Can be modified to work on other enderwires.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Had a couple Disco on a Stick LEDs laying around from a previous Voron 2.4 300mm build and found that it would fit perfectly in an Enderwire.
This mount is designed specifically for Fizzystech's enderwire enclosure with holes that align with the enclosure panels. Step files are available so that you can adjust the positioning of the holes for your own enclosure or remove them altogether to use with VHB tape.
The LED stick has been angled so that it points to the center of the bed and a hole big enough for a 3-pin connector has been added on the end. Print 2 extrusion cable hiders per side, 4 total.
FT Enderwire repo: https://github.com/fizzystech/ft_enderwire
PCB splitter/splicer for electronics bay to combine a pair of Disco on a Sticks.
https://www.fabreeko.com/products/3-pin-xh-3-position-by-shammy?variant=45672684060927
PCB splitter/splicer for electronics bay to combine a pair of Daylight on a Sticks.
https://www.fabreeko.com/products/3x2-xh-splicer-pcb?_pos=2&_sid=a77dd12fa&_ss=r&variant=44224302317823