Voron Switchwire / Enderwire XZ Belt Tensioner (Motor Mount Adjustment Mod)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple 3-part belt tensioner for Voron Switchwire and Enderwire with easy motor adjustment.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Tired of adjusting belt tension by moving the motor? This solves it.
This is a simple and compact belt tensioner designed for Voron Switchwire and Enderwire (XZ axes).
No need to loosen motor screws during adjustment
The mechanism works by pulling the motor mount using an adjustment wheel. As you tighten the wheel, the belt tension increases smoothly and precisely.
Why use this?
No need to fight with motor position manually
Easy fine-tuning of belt tension
Clean and minimal design
Perfect for quick adjustments
Features
3-part design
Smooth tension control using a wheel
Compact and rigid
Easy to print
Assembly
Heat-set a threaded insert into the adjustment wheel
Insert the screw into the main body
Assemble all 3 parts
Tighten the wheel → motor is pulled → belt is tensioned
Printing
Material: ASA (recommended)
Profile: standard Voron settings
Print orientation: as provided
Quantity: 2 pieces required
⚠ Create a mirrored copy in slicer
Hardware
1× M4 heat-set threaded insert (for the adjustment wheel)
1× M4 screw with hex head (20mm)
Assorted M4/M5 screws
T-nuts for 2020 extrusion
Tips
If parts feel rough → lightly sand contact surfaces
Apply a small amount of silicone grease
Works even without sanding, grease is usually enough
Compatibility
Voron Switchwire
Enderwire
Other similar Switchwire-style builds
Disclaimer
Use at your own risk. You may need to slightly adjust tolerances depending on your printer.