1 / 2
BTT Knomi v1 skirt for Voron Enderwire — zdjęcie 1
1 / 2

BTT Knomi v1 skirt for Voron Enderwire

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I couldn't find an Enderwire skirt that incorporates the BTT Knomi v1 (model without touch). Remixed in Fusion 360.

Ocena
0 / 5
Polubienia
9
Pobrania
24
Wydruki
0
Wyświetlenia
189
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

The summary pretty much says it all. I wanted to incorporate my Knomi into my Enderwire seamlessly and could not find a skirt using the v1 hardware. Unfortunately I think I killed the screen on my device before I installed it in the skirt, but it's a good fit.

2x m2.5 8mm screws required for assembly of the bracket. Self-tapping SHCS or BHCS screws recommended.

I printed with Voron 0.2 Standard settings in PLA+ with 15% infill because my Enderwire is not and will not be enclosed.

New revised model has been uploaded which better fits the Panda model of Knomi v1. I received this as a replacement by mistake for my dead original Knomi. For this version you will need to print the A1 Series Universal Rear Cover 外壳通用后盖.stl file from the bigtreetech Github repo.

Recommended to print in ABS or ASA with Voron PIF settings.

Tagi