Ender3 / Enderwire Leightweight Y Carriage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
its a stiffen up printable Y carriage for the Ender3 Ender3pro and Voron Enderwire
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 129
- Wydruki
- 1
- Wyświetlenia
- 1020
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Its a prototype for now,
I printed this from Nobufil ABSx for now
with 5 top- and bottomlayers and 5 walls with30% cubic infill in 0.2mm layerheight.
ABS isnt the ideal material for this, i would recomend something like PC or Nylon due to thermal resistency.
but for now its just a test.
UPDATE!
i tested it in ABS for 30 printhours while printing ABS parts in a closed chamber.
Cons: the corners where the springs sit have sagged several millimetres over the course of these 30 hours. so abs is not suitable for this application
Pros: I did this mainly for the weight of the Y-axis, and it was a complete success, I was able to significantly and noticeably increase the acceleration on the Y-axis
Fazit: it's definitely worth the upgrade, but you need a material with a high heat resistance.