Enderwire Double Shear Y Motor Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds a secondary bearing on the motor mount to support the motor shaft’s far end for Enderwire setups.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Seffyr adapted the Switchwire Double Shear Motor Mount for the Enderwire conversion, but originally only for the X and Z motor mounts.
To make it work for the Y axis, I needed a more compact housing that sits slightly closer to the belt. So, I took AmorphousCrow’s oversized Y motor mount and remixed it with the ball bearing mount from nhchiu.
I also tweaked the open area around the motor to provide better clearance for the mounting screws. With my StepperOnline motors, the flange heel caused a slight offset that pushed against the bolts.
Please make sure to print my version of the bearing retainer, as it’s 1 mm thinner for improved fit.