Enderwire 2020 Extrusion Cut Guide with T-Nut Hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Need to cut your 2020 extrusion for an Enderwire conversion? This guide will help you cut it straight.
- Ocena
- 5 / 5
- Polubienia
- 61
- Pobrania
- 379
- Wydruki
- 6
- Wyświetlenia
- 1192
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
NOTE! You may need to scale the model up about 1-2%, I designed it with very tight tolerances.
New v2 Version! Now includes a larger cut face, and a hole where you can put an m5 bolt thru along with a t-nut to clamp the guide onto the extrusion for more secure cuting!
This is designed primarily for cutting the 2020 x-gantry extrusion on the Ender 3 when performing a coversion to the Enderwire.
This can be used for similar 2020 extrusions where you will be cutting it by hand using a hacksaw or other means and need a guide surface to reference against while cutting.
You slide it onto the extrusion with the wider part pointing towards the end of the extrusion you plan to cut. Use the widest part as a flat reference/guide for cutting.